I make adapters from anything to anything. From: Mark Radabaugh Sent: Sunday, April 02, 2017 7:22 AM To: af@afmug.com Subject: Re: [AFMUG] Looking for a waveguide adapter for Remec 11ghz
Gino, I think I have finally figured out the trick to turning a Andrew/Commscope antenna into the correct direct mount for most of the radios out there. What exactly are you trying to mount to what? Haven’t figured out the same for RadioWaves. I have been having good luck turning antennas made for DragonWave or PTP800 into Ceragon or Cambium 820’s, or the other way. Finding the correct part numbers is the hardest part. Mark On Apr 1, 2017, at 12:41 PM, Gino Villarini <g...@aeronetpr.com> wrote: Coax or ubr From: Af <af-boun...@afmug.com> on behalf of Chuck McCown <ch...@wbmfg.com> Reply-To: "af@afmug.com" <af@afmug.com> Date: Saturday, April 1, 2017 at 12:09 PM To: "af@afmug.com" <af@afmug.com> Subject: Re: [AFMUG] Looking for a waveguide adapter for Remec 11ghz Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> I have a design and some prototypes. You looking for coax adapters? From: Gino Villarini Sent: Saturday, April 01, 2017 10:06 AM To: af@afmug.com Subject: [AFMUG] Looking for a waveguide adapter for Remec 11ghz Got some remec interface antenna, any remec to waveguide adapters in the market? Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968