I normally deploy 4 120 sectors on a tower. ABAB frequency. No issues
observed Keep 5mhz guard between AB and you should be fine. Almost all
customers can see more than 1 sector. Just waiting for automatic rescan
in EPMP to automatically put them back on the strongest sector after an
AP Reboot.
On 4/10/2017 9:31 AM, Adam Moffett wrote:
Disclaimer: I haven't done it.
I'm thinking if you put a guard band between the adjacent sectors
you'll be fine. If the F/B ratio is comparable to the Cambium sector
antenna then you should be able to do F/B re-use. It takes a pretty
high F/B ratio though.
------ Original Message ------
From: "Paul McCall" <[email protected] <mailto:[email protected]>>
To: "[email protected]" <[email protected] <mailto:[email protected]>>
Sent: 4/10/2017 10:21:58 AM
Subject: [AFMUG] overlap on ePMP sectors ?
We have 3 KP Performance 120 degree sectors on a tower with ePMP. It
was the first tower we did with ePMP, and hindsight being 20/20 I
would have done 40 90s to get the F/B Frequency reuse benefit.
If we add another 120 and make them all N S E W (4 total) I would
have about 30 degrees of overlap per sector. What is that going to
do with ePMP performance, if anything?
Paul
Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800
[email protected] <mailto:[email protected]>
www.pdmnet.com <http://www.pdmnet.com>
www.floridabroadband.com <http://www.floridabroadband.com>
