ePMP doesn't automatically jump between sectors at all. I tested this with 3.2 in the last few months. There are a bunch of customers getting -75 from the south facing sector when east is -60. It's been a good month on the wrong sector at this point. I expect a manual rescan or reboot would fix it.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Apr 10, 2017 at 10:37 AM, Nate Burke <[email protected]> wrote: > I normally deploy 4 120 sectors on a tower. ABAB frequency. No issues > observed Keep 5mhz guard between AB and you should be fine. Almost all > customers can see more than 1 sector. Just waiting for automatic rescan in > EPMP to automatically put them back on the strongest sector after an AP > Reboot. > > > On 4/10/2017 9:31 AM, Adam Moffett wrote: > > Disclaimer: I haven't done it. > > I'm thinking if you put a guard band between the adjacent sectors you'll > be fine. If the F/B ratio is comparable to the Cambium sector antenna then > you should be able to do F/B re-use. It takes a pretty high F/B ratio > though. > > > ------ Original Message ------ > From: "Paul McCall" <[email protected]> > To: "[email protected]" <[email protected]> <[email protected]> > Sent: 4/10/2017 10:21:58 AM > Subject: [AFMUG] overlap on ePMP sectors ? > > We have 3 KP Performance 120 degree sectors on a tower with ePMP. It was > the first tower we did with ePMP, and hindsight being 20/20 I would have > done 40 90s to get the F/B Frequency reuse benefit. > > > > If we add another 120 and make them all N S E W (4 total) I would have > about 30 degrees of overlap per sector. What is that going to do with ePMP > performance, if anything? > > > > Paul > > > > Paul McCall, President > > PDMNet, Inc. / Florida Broadband, Inc. > > 658 Old Dixie Highway > > Vero Beach, FL 32962 > > 772-564-6800 <(772)%20564-6800> > > [email protected] > > www.pdmnet.com > > www.floridabroadband.com > > > > > > >
