We have a tower using the same AF5x frequency (both Masters - I'll call them BHM-1 and BHM2) going about 180 deg. Different directions with about 30 ft. of vertical separation. About 2 miles away is the "slave side" (I'll call in BHS2) of one of these on a building, and I want another AFX5 dish going almost 180 degrees to this slave going to another tower 1.5 miles away. I can get about 15 ft. separation F/B between BHS2 and this new dish. Can I use the same frequency again on this new link? If I so I would assume I make the new "back to back - 15 ft. apart AF5x also be a slave and the far end (new tower) be the master?
Since they are all GPS synced I didn't know how much difference it makes or are there additional considerations? Paul Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800 [email protected]<mailto:[email protected]> www.pdmnet.com<http://www.pdmnet.com> www.floridabroadband.com<http://www.floridabroadband.com>
