If we have one in the 5200 range (slave) and a Master 5775 that is 30 ft. away (horizontally, but still back to back on the side of a building) would that work?
Paul From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mathew Howard Sent: Monday, April 10, 2017 1:16 PM To: af <af@afmug.com> Subject: Re: [AFMUG] Airfiber 5x GPS Sync Frequency reuse Yeah, GPS sync won't work if you have a master and a slave on the same tower, so you'll need to make sure you have enough separation (both physical and frequency) to keep from interfering. On Mon, Apr 10, 2017 at 12:02 PM, Paul McCall <pa...@pdmnet.net<mailto:pa...@pdmnet.net>> wrote: We were going to run 75/25, so could I take the New nearby dish and make it master (being 15 ft. away F/B? I might be able to go up to 40 or 50ft. Back to back as well. thinking it through it really needs to be the Master. I guess I might have to use a different frequency for the new link if it doesn’t work with the Master being close to the Slave. Paul From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of Mathew Howard Sent: Monday, April 10, 2017 12:58 PM To: af <af@afmug.com<mailto:af@afmug.com>> Subject: Re: [AFMUG] Airfiber 5x GPS Sync Frequency reuse Yeah, it should work - as long as the the new master on the far end can't see either of the masters on the first tower, it shouldn't be a problem. You do need to have the ratio matched on all of the masters though, so if for example, you have the current link set to 75/25, you would have to set the new master on the far end to 75/25 also (so you would effectively only be getting 25% download at that site)... not really an issue if you're running 50/50, or if 25% down is enough bandwidth at that location, but something to keep in mind. On Mon, Apr 10, 2017 at 11:49 AM, Paul McCall <pa...@pdmnet.net<mailto:pa...@pdmnet.net>> wrote: We have a tower using the same AF5x frequency (both Masters – I’ll call them BHM-1 and BHM2) going about 180 deg. Different directions with about 30 ft. of vertical separation. About 2 miles away is the “slave side” (I’ll call in BHS2) of one of these on a building, and I want another AFX5 dish going almost 180 degrees to this slave going to another tower 1.5 miles away. I can get about 15 ft. separation F/B between BHS2 and this new dish. Can I use the same frequency again on this new link? If I so I would assume I make the new “back to back – 15 ft. apart AF5x also be a slave and the far end (new tower) be the master? Since they are all GPS synced I didn’t know how much difference it makes or are there additional considerations? Paul Paul McCall, President PDMNet, Inc. / Florida Broadband, Inc. 658 Old Dixie Highway Vero Beach, FL 32962 772-564-6800<tel:(772)%20564-6800> pa...@pdmnet.net<mailto:pa...@pdmnet.net> www.pdmnet.com<http://www.pdmnet.com> www.floridabroadband.com<http://www.floridabroadband.com>