It was at 24.2V. We just turned it up to 25V. I am guessing that will charge the batteries a little better?
David Coudron david.coud...@advantenon.com | Mobile: 612-991-7474 Advantenon, Inc. i...@advantenon.com | 3500 Vicksburg Lane N, Suite 315, Plymouth, MN 55447 | www.advantenon.com | Phone: 800-704-4720 | Local: 612-454-1545 -----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Seth Mattinen Sent: Thursday, May 11, 2017 8:33 AM To: af@afmug.com Subject: Re: [AFMUG] MeanWell DR-UPS40 question On 5/11/17 4:14 AM, David Coudron wrote: > We did initially give them a good charge, although I am thinking they > are not getting charged fully after testing a rundown. We are watching > the currently going into the batteries with the TPDIN, and that is > showing zero current, but we are going to pull them off the system and > charge separately once to see how they react to that. I am guessing > the MeanWells will take quite a while to charge those up fully. We > are using 14 ga stranded wire between all components in the system, > except the AC feed. That is solid copper. What's your DC power supply voltage output set to?
