JC Penny protocol over Bell 202 4 wire circuits. 1978
-----Original Message-----
From: Robert
Sent: Tuesday, May 23, 2017 8:52 AM
To: af@afmug.com
Subject: Re: [AFMUG] Ethernet over coax
PrimeOS networking, write your own damn drivers... In Pascal! 1982
On 5/23/17 7:48 AM, Dustin Jurman wrote:
FINE! – Thomas Conrad 100mb arcnet. Mike Drop…..
*From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Jaime Solorza
*Sent:* Tuesday, May 23, 2017 10:42 AM
*To:* Animal Farm <af@afmug.com>
*Subject:* Re: [AFMUG] Ethernet over coax
IBM 5250 emulation Novell cards in IBM XT PC over WaveLAN 900 MHz link for
Cal TV...3 miles .. July 1992...
On May 23, 2017 8:31 AM, "Dustin Jurman" <dus...@rseng.net
<mailto:dus...@rseng.net>> wrote:
Better hit the mark on that thicknet with a Vampire Tap or you’ll
get some reflections. Since you said Vampire Tap I’m going to
counter with NE2000.
DSJ
*From:* Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] *On Behalf Of *Chuck McCown
*Sent:* Tuesday, May 23, 2017 10:22 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] Ethernet over coax
Vampire tap.
*From:*Dustin Jurman
*Sent:*Tuesday, May 23, 2017 8:21 AM
*To:*af@afmug.com <mailto:af@afmug.com>
*Subject:*Re: [AFMUG] Ethernet over coax
Those were the good old days when the only tools you needed was a t
connector and a 50 ohm terminator. J
DSJ
*From:*Af [mailto:af-boun...@afmug.com] *On Behalf Of *Ron M.
*Sent:* Tuesday, May 23, 2017 10:11 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] Ethernet over coax
https://en.wikipedia.org/wiki/10BASE2
Been there, done that?
On Mon, May 22, 2017 at 3:42 PM, Harold Bledsoe
<hbledso...@gmail.com <mailto:hbledso...@gmail.com>> wrote:
Hi folks,
It's that time again - looking for brave, er I mean beta users
for an ethernet over coax system. The same one could be used
for phone line later.
The protocol is based on g.hn <http://g.hn> so it can support
PTMP on the system.
Please shoot me a note offlist and I'll get you added.
Thanks,
-Hal