no Problems on 3.3
2017-06-03 3:22 GMT+02:00 George Skorup <george.sko...@cbcast.com>: > I have roughly 10% of our ePMP stuffs on 3.3. The rest is all on 3.2.2. > Haven't noticed any issues on the 3.3 units, but 10% is obviously a small > amount. > > > On 6/2/2017 7:53 PM, Steve Jones wrote: > > sweet!! I love randomness > > I did downgrade the affected hardware and it resolved, just haven't opened a > case with them yet > > > On Fri, Jun 2, 2017 at 4:12 PM, Joe Novak <jno...@lrcomm.com> wrote: >> >> I was just reading about this earlier. There does appear to be a problem >> with some 'hardware' as cambium puts it, replacing the hardware with a >> different radio usually fixes it. However, downgrade the firmware to 3.2.2 >> and it also fixes it. >> >> Seems like more 'cold weather' BS to me. Different variations of hardware >> having software troubles. I'll stay on 3.2.2 for now. Check the 5.3 release >> thread on the cambium forums, that is where I got it from. >> >> On Thu, Jun 1, 2017 at 10:27 AM, Steve Jones <thatoneguyst...@gmail.com> >> wrote: >>> >>> we ran this for a bit, no noteable issues, but now seem to be having more >>> frequent disconnects, even on good links, is this a firmware issue others >>> are seeing? >>> It appears the sm drops when a load is applied. one thing I'm seeing is >>> theyre not modulating down much when idle and lots of broadcast traffic on >>> the counters, like 80-90 percent is bc >> >> > >