Epmp 1000 is 20 to 50ish volts Works with Ubnt or Moto polarity
Remember netonix is normal only and that works Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 14, 2017 12:44 PM, "Nate Burke" <n...@blastcomm.com> wrote: > Ok, that's what I thought, but I can't get them to come up at the POE+ > setting. I'll do bench testing this afternoon. > > On 6/14/2017 11:33 AM, Josh Baird wrote: > > They are 802.3af compliant. We run all of ours at 48V. > > On Wed, Jun 14, 2017 at 11:46 AM, Nate Burke <n...@blastcomm.com> wrote: > >> For some reason I thought I had tested this, but now it's not working. I >> thought that the EPMP 1000 GPS units (5ghz gigabit with Sync) will support >> up to 54V, and would Run POE+. I'm trying to power them off an Edgeswitch, >> and I can only get them to come up if I run them at 24v. At POE+, it looks >> like it just keeps cycling the power on and off. Does the POE+ only work >> if the 45,78 pairs are Reversed? I have another site that I can run at >> POE+, but I think I might have the pairs reversed on the cables between the >> Edgepoint and the APs. >> > > >
