We are doing the same here
Mitch
On 6/28/2017 7:44 PM, Jaime Solorza wrote:
When I was a WISP, 99 % of our gear was Ubiquiti...it worked
well...still operational....and now most of the SCADA Networks we have
done are using Ubiquiti...we have replaced MDS radios which are rock
solid and expensive but can't carry video and data as easily as
Ubiquiti. Plus water districts love the 85 to 200 cost of radios
versus 1300 per radio.
Jaime Solorza
On Jun 28, 2017 6:31 PM, "Rory Conaway" <[email protected]
<mailto:[email protected]>> wrote:
Not if ROI and profitability is taken into account.
Rory
*From:* Af [mailto:[email protected]
<mailto:[email protected]>] *On Behalf Of *Chris Wright
*Sent:* Wednesday, June 28, 2017 5:21 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Radwin 5000 Pro vs. Cambium 450m
I’m going to infer you’d like to talk about Mimosa and Ubiquiti,
both of which are still wet behind their ears when it comes to
providing a mature platform for PTMP > 3 mile. They’re cheaper and
underdeveloped. Case in point: SNMPv3 has been defined for fifteen
years now and UBNT still hasn’t implemented it. Mimosa didn’t
support SNMP *at all* in their A5 until the latest firmware update
this month. Not unlike Apple computers in the early 2000’s,
they’re poised to make a significant impact on the market in the
future, but currently still pretty much a joke.
Chris Wright
Network Administrator
*From:*Af [mailto:[email protected]] *On Behalf Of *Rory Conaway
*Sent:* Wednesday, June 28, 2017 4:15 PM
*To:* [email protected] <mailto:[email protected]>
*Subject:* Re: [AFMUG] Radwin 5000 Pro vs. Cambium 450m
Are these the only 2 choices?
Rory
*From:* Af [mailto:[email protected]] *On Behalf Of *Eric
Muehleisen
*Sent:* Wednesday, June 28, 2017 11:46 AM
*To:* [email protected] <mailto:[email protected]>
*Subject:* [AFMUG] Radwin 5000 Pro vs. Cambium 450m
Let's assume you have an unlimited budget. Which platform would
you choose and why?
