Yup, RB3011 is what you want.

On Fri, Jul 21, 2017 at 12:55 PM, Paul McCall <pa...@pdmnet.net> wrote:

> Yep, don’t why I didn’t think of that.  The 3011 will fit the bill nicely
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Colin Stanners
> *Sent:* Friday, July 21, 2017 1:36 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] cost effective, mid-range performance Mikrotik
> router needed
>
>
>
> RB3011. Fast, stable (once you upgrade past earlt factory firmware that
> had packet loss bug), $170.
>
>
>
> On Fri, Jul 21, 2017 at 12:17 PM, Paul McCall <pa...@pdmnet.net> wrote:
>
> As we moved all out towers to Fiber / Power up the tower, we still have
> the router at the bottom (running a UBNT S16) at the tower top.  The only
> thing we really have at the bottom that plugs into the router (other than
> Fiber) is a SiteMonitor.   (Boy, I wish it had an SFP, but I digress.)
>
>
>
> So, we use something like the CRSCRS125-24G-1S (because it was already
> there and has an SFP port)  or a RB2011 (same reason).  Both have a 600Mhz
> MIPS 74Kc V4.12.
>
> I am looking to find something that has more power without jumping up to a
> $ 380 CCR1009.  We have 25+ towers that fit into that scenario.  In each
> case, these towers never push for than 50 Mbit of BW but often go over 60%
> CPU.  The use Queues per connected customers (that it grabs from Radius)
> and very basic Firewall rules to restrict access on all the good ports to
> our internal office subnet.
>
>
>
> But, we just need a bit more horsepower.  Was wondering if someone had any
> ideas?  Like maybe building some little cube box to run ROS, but not seeing
> a cost effective solution that has a fiber port and a copper port.  There
> is the Power Box pro with same CPU but 800Mhz, but not sure that would be
> the tipping point that we need long term.
>
>
>
> Any suggestions>
>
>
>
> Paul
>
>
>
>
>
> Paul McCall, President
>
> PDMNet, Inc. / Florida Broadband, Inc.
>
> 658 Old Dixie Highway
>
> Vero Beach, FL 32962
>
> 772-564-6800 <(772)%20564-6800>
>
> pa...@pdmnet.net
>
> www.pdmnet.com
>
> www.floridabroadband.com
>
>
>
>
>
>
>

Reply via email to