Further to 1) … I couldn’t find any information on BIDA. However, if you mean BIDI Simplex, then we don’t currently support this, but have plans to add this support (via software) in the near future. I don’t yet have a release this support is targeted for, but it will be on the roadmap once we do.
Hope this helps. Matt Carl – 1) Not sure on this… I have asked engineering about support for BIDA module (not BIDI?), and will post an answer when I get one… 2) Yes, there is an “extended” gland that comes with the kit. The kit consists of three parts: the SFP module itself, the extended gland, and the entitlement key to apply the license to the radio. Matt From: Af [mailto:af-boun...@afmug.com] On Behalf Of Carl Peterson Sent: Thursday, August 3, 2017 9:17 AM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] 450M SFPs 1) I know you need to buy cambiums SFPs to get the license to unlock the SFP port on the 450M, but once the license is applied, is there any limitation as to what SFPs you can run? Would much prefer to use BIDA so we can just run clearshield simlex with SC SOCs on it and so we don't have to waste fiber. Has anyone tested other SFPs in it and have any not worked? 2) The SFP cage is flush with the exterior of the case and has very little space in the antenna side of the cage so you can't screw the cambium gland in whith an SFP installed. Does the SFP kit come with a special gland with room for the SFP and connector?
