Carl, I apologize, I was working on a 820C project earlier and for some reason I misread this as a discussion of 820’s and not 450M.
The glands I called out earlier are probably not going to fit in the 450m. I don’t have a 450M I can try it in at the moment. We are supposed to be getting 4 in tomorrow and I can try it and let you know if it fits. We have powered the 450m with both +48V and -48V DC supplies through a CMM5 And since we are talking about a 450m and not a 820c, I have not tried a BiDi SFP yet. Sorry for the misinformation. To many voices in the head :-) Mark > On Aug 3, 2017, at 4:25 PM, Carl Peterson <[email protected]> wrote: > > Matt, > > While I have your attention, I have two more 450M questions. > > 1) What are the supported POE pinouts? > > 2) Off chance, but it it ground agnostic, i.e isolated ground? > > It is nice to see an SFP port but I really would have LOVED to see and SFP > and -48VDC or +/-48VDC like most Siklu gear. > > On Thu, Aug 3, 2017 at 4:18 PM, Gino A. Villarini <[email protected] > <mailto:[email protected]>> wrote: > In this day and age… > > From: Af <[email protected] <mailto:[email protected]>> on behalf of > Mike Hammett <[email protected] <mailto:[email protected]>> > Reply-To: "[email protected] <mailto:[email protected]>" <[email protected] > <mailto:[email protected]>> > Date: Thursday, August 3, 2017 at 2:34 PM > To: "[email protected] <mailto:[email protected]>" <[email protected] <mailto:[email protected]>> > Subject: Re: [AFMUG] 450M SFPs > > A license key to use the SFP port? Seriously? > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > > > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > > > > Gino A. Villarini > > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > > <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> > > From: "Matt Mangriotis" <[email protected] > <mailto:[email protected]>> > To: [email protected] <mailto:[email protected]> > Sent: Thursday, August 3, 2017 10:20:32 AM > Subject: Re: [AFMUG] 450M SFPs > > Carl – > > > 1) Not sure on this… I have asked engineering about support for BIDA > module (not BIDI?), and will post an answer when I get one… > > 2) Yes, there is an “extended” gland that comes with the kit. The kit > consists of three parts: the SFP module itself, the extended gland, and the > entitlement key to apply the license to the radio. > > > Matt > > <> > From: Af [mailto:[email protected] <mailto:[email protected]>] On > Behalf Of Carl Peterson > Sent: Thursday, August 3, 2017 9:17 AM > To: [email protected] <mailto:[email protected]> > Subject: [AFMUG] 450M SFPs > > > 1) I know you need to buy cambiums SFPs to get the license to unlock the SFP > port on the 450M, but once the license is applied, is there any limitation as > to what SFPs you can run? Would much prefer to use BIDA so we can just run > clearshield simlex with SC SOCs on it and so we don't have to waste fiber. > Has anyone tested other SFPs in it and have any not worked? > > > 2) The SFP cage is flush with the exterior of the case and has very little > space in the antenna side of the cage so you can't screw the cambium gland in > whith an SFP installed. Does the SFP kit come with a special gland with room > for the SFP and connector? > > > > > > > > > -- > Carl Peterson > > PORT NETWORKS > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 >
