How much is it? Jon Langeler Michwave Technologies, Inc.
> On Aug 16, 2017, at 8:49 AM, Mike Hammett <af...@ics-il.net> wrote: > > It still blows my mind that use of the SFP port requires a license. > > > > ----- > Mike Hammett > Intelligent Computing Solutions > > Midwest Internet Exchange > > The Brothers WISP > > > > > From: "Carl Peterson" <cpeter...@portnetworks.com> > To: af@afmug.com > Sent: Tuesday, August 15, 2017 12:15:04 PM > Subject: Re: [AFMUG] 450M SFPs > > Got the SFP kit and entitlement. Created the license and applied it, but I > can't find anything in the config about the SFP port or any way to tell it to > use the SFP port. Am I just being stupid and missing something? > >> On Thu, Aug 3, 2017 at 5:54 PM, Carl Peterson <cpeter...@portnetworks.com> >> wrote: >> Thanks Mark, >> >> Was wondering about that gland, it looks a lot like the glands that come >> with Siklu radios which are too big. I've ordered the 450M kit and I'll see >> how it fits and test out BiDa. I'm planning on adding an Isolated DC-DC >> +48V bus at the site at least for now unless someone else wants to test them >> out for awhile on -48. Kind of a PITA though. Wish everyone would just >> support + and - 48DC on a DC terminal, at least on gear costing multiple Ks. >> >> >>> On Thu, Aug 3, 2017 at 4:42 PM, Mark Radabaugh <m...@amplex.net> wrote: >> >>> Carl, >>> >>> I apologize, I was working on a 820C project earlier and for some reason I >>> misread this as a discussion of 820’s and not 450M. >>> >>> The glands I called out earlier are probably not going to fit in the 450m. >>> I don’t have a 450M I can try it in at the moment. We are supposed to be >>> getting 4 in tomorrow and I can try it and let you know if it fits. >>> >>> We have powered the 450m with both +48V and -48V DC supplies through a CMM5 >>> >>> And since we are talking about a 450m and not a 820c, I have not tried a >>> BiDi SFP yet. >>> >>> Sorry for the misinformation. To many voices in the head :-) >>> >>> Mark >>> >>> >>> On Aug 3, 2017, at 4:25 PM, Carl Peterson <cpeter...@portnetworks.com> >>> wrote: >>> >>> Matt, >>> >>> While I have your attention, I have two more 450M questions. >>> >>> 1) What are the supported POE pinouts? >>> >>> 2) Off chance, but it it ground agnostic, i.e isolated ground? >>> >>> It is nice to see an SFP port but I really would have LOVED to see and SFP >>> and -48VDC or +/-48VDC like most Siklu gear. >>> >>>> On Thu, Aug 3, 2017 at 4:18 PM, Gino A. Villarini <g...@aeronetpr.com> >>>> wrote: >>>> In this day and age… >>>> >>>> From: Af <af-boun...@afmug.com> on behalf of Mike Hammett >>>> <af...@ics-il.net> >>>> Reply-To: "af@afmug.com" <af@afmug.com> >>>> Date: Thursday, August 3, 2017 at 2:34 PM >>>> To: "af@afmug.com" <af@afmug.com> >>>> Subject: Re: [AFMUG] 450M SFPs >>>> >>>> A license key to use the SFP port? Seriously? >>>> >>>> >>>> >>>> ----- >>>> Mike Hammett >>>> Intelligent Computing Solutions >>>> >>>> Midwest Internet Exchange >>>> >>>> The Brothers WISP >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Gino A. Villarini >>>> >>>> President >>>> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 >>>> >>>> <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> >>>> >>>> From: "Matt Mangriotis" <matt.mangrio...@cambiumnetworks.com> >>>> To: af@afmug.com >>>> Sent: Thursday, August 3, 2017 10:20:32 AM >>>> Subject: Re: [AFMUG] 450M SFPs >>>> >>>> Carl – >>>> >>>> >>>> 1) Not sure on this… I have asked engineering about support for BIDA >>>> module (not BIDI?), and will post an answer when I get one… >>>> >>>> 2) Yes, there is an “extended” gland that comes with the kit. The >>>> kit consists of three parts: the SFP module itself, the extended gland, >>>> and the entitlement key to apply the license to the radio. >>>> >>>> >>>> Matt >>>> >>>> >>>> >>>> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Carl Peterson >>>> Sent: Thursday, August 3, 2017 9:17 AM >>>> To: af@afmug.com >>>> Subject: [AFMUG] 450M SFPs >>>> >>>> >>>> 1) I know you need to buy cambiums SFPs to get the license to unlock the >>>> SFP port on the 450M, but once the license is applied, is there any >>>> limitation as to what SFPs you can run? Would much prefer to use BIDA so >>>> we can just run clearshield simlex with SC SOCs on it and so we don't have >>>> to waste fiber. Has anyone tested other SFPs in it and have any not >>>> worked? >>>> >>>> >>>> 2) The SFP cage is flush with the exterior of the case and has very little >>>> space in the antenna side of the cage so you can't screw the cambium gland >>>> in whith an SFP installed. Does the SFP kit come with a special gland >>>> with room for the SFP and connector? >>>> >>> >>> >>> >>> -- >>> Carl Peterson >>> >>> PORT NETWORKS >>> >>> 401 E Pratt St, Ste 2553 >>> >>> Baltimore, MD 21202 >>> >>> (410) 637-3707 >>> >> >> >> >> >> -- >> Carl Peterson >> >> PORT NETWORKS >> >> 401 E Pratt St, Ste 2553 >> >> Baltimore, MD 21202 >> >> (410) 637-3707 >> > > > > -- > Carl Peterson > > PORT NETWORKS > > 401 E Pratt St, Ste 2553 > > Baltimore, MD 21202 > > (410) 637-3707 > >
