Ethernet. Power it up, leave ethernet link down. Switching power supply. Try battery power only, leave ethernet link down.
CPU/SoC. Pretty much the end of the road. I remember a thread from maybe a couple years ago where an UBNT radio was interfering with VzW's uplink. I think UBNT did a special firmware that changed the CPU freq. I don't remember which radio that was.
I want to say the IF side of the Dish LNB can be between 500-2200MHz. The cables tied together is obviously not good.
You're probably better off just moving your radio and cable to just be done with it.
On 9/1/2017 1:05 PM, Jay Weekley wrote:
Got a call from a guy in the field that says Dish moved their equipment behind our 2.4 Airgrid and whenever our radio is powered up the customer loses their high definition channels. Our cable and theirs are tie wrapped together so I suggested that they power the radio with their survey rig to see if some kind of interference was involved. Any idea on what is causing this problem? Other suggestions besides moving our radio?
