probably because right now it is cutting into his Tecate time ! :)
Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] > From: "Bill Prince" <[email protected]> > To: [email protected] > Sent: Saturday, September 2, 2017 8:14:34 PM > Subject: Re: [AFMUG] Wire label labelmaker recommendation > Jaime, you are such a talker. Once in a while, I'd like to see a response that > was short and concise. > bp > <part15sbs{at}gmail{dot}com> > On 9/2/2017 5:06 PM, Jaime Solorza wrote: >> Panduit >> Jaime Solorza >> On Sep 2, 2017 6:01 PM, "Forrest Christian (List Account)" < >> [email protected] > wrote: >>> I've been using a brother "TZ" labelmaker for quite a while. Works great on >>> flat >>> surfaces. >>> Recently, I've been needing to label wires for the test system - I'm finding >>> that the TZ tape likes to peel. I'm going to get a brand new roll of the >>> cable&wire flexible id tape, in case I got a bad one or mistakenly used the >>> wrong tape for some of these labels. But... I'm pretty convinced that this >>> is >>> more related to the fact that these cables are inserted/removed regularly >>> and >>> as such the label+cable is subject to being flexed. With the plastic tape >>> being >>> not as flexible as the cable, this is causing enough 'strain' on the >>> adhesive >>> for it to release. >>> I've been curious about the brady and other similar labelers. Unfortunately >>> I >>> don't know what label is going on these cables at build time so for the most >>> part I'm going to have to stick with some sort of adhesive label (unless >>> there >>> is another option other than a heatshrink tube). The fact that brady has >>> cloth >>> labels makes me wonder if this would work better... >>> What does everyone use, and what experience have you had with the labels? >>> BTW, many of these cables are CAT5 sized. Some are bigger/smaller though... >>> -- >>> Forrest Christian CEO , PacketFlux Technologies, Inc. >>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>> [email protected] | http://www.packetflux.com
