We were just talking about this the other day. On our second solar site,
we had a storm that effectively "disassembled" . It was a Unirac
side-pole mount similar to the one pictured below my signature. It was
made from extruded aluminum and bolted together with stainless hardware.
The wind built up some kind of sympathetic vibration, and about half of
the bolts and nuts came loose and fell to the ground. The ones that
remained were pulled through the aluminum extrusions, which then bent,
twisted, and "took flight". At that time we had 2 150 watt panels
installed. One of the solar panels landed 100-150 feet away, and landed
in soft mud. Except for a couple of minor bends in the frame, it was
intact, and still functional. The second panel landed about 1/4 mile
away, and was almost completely disassembled. Quite a sight in retrospect.
bp
<part15sbs{at}gmail{dot}com>
Side of Pole Mount for 1x Type B Solar Module 20-26\" x 39-53\"On
10/23/2017 10:37 AM, Chuck McCown wrote:
I would sure like to study the ones that are left and try to determine
why some ripped off and some didn't. Lots of really good research
opportunities there.
-----Original Message----- From: Robert
Sent: Monday, October 23, 2017 11:28 AM
To: [email protected]
Subject: Re: [AFMUG] Solar farm in PR
I wouldn't be surprised if a lot of what's left disappears...
On 10/23/17 7:19 AM, Chuck McCown wrote:
