Upgrading the AP seems to have a performance boost for all of the
existing M clients anyway.

On Mon, Nov 20, 2017 at 3:52 PM, Mathew Howard <[email protected]> wrote:
> Yeah, you're understanding it correctly. It does stick you with having to
> stay with the old client radios until after the AP is upgraded, but it's
> better than no backwards compatibility.
>
> On Mon, Nov 20, 2017 at 2:16 PM, Bill Prince <[email protected]> wrote:
>>
>> I may be misunderstanding the way it works, but allowing M-series clients
>> to connect to an AC AP would allow you to upgrade the the AP from M to AC
>> now, and upgrade the clients afterward (as needed, as able).
>>
>>
>> bp
>> <part15sbs{at}gmail{dot}com>
>>
>> On 11/20/2017 11:55 AM, Adam Moffett wrote:
>>
>> Is this common with mixing ac & n?  For some reason I thought there was
>> backwards and forwards compatibility in 802.11.
>> Is it a design choice by Ubiquiti for performance reasons maybe?
>>
>> I could imagine that being a quandry....you don't want to keep buying the
>> older stations, but maybe you can't immediately upgrade every AP either.
>>
>>
>> ------ Original Message ------
>> From: "Mathew Howard" <[email protected]>
>> To: "af" <[email protected]>
>> Sent: 11/20/2017 1:43:51 PM
>> Subject: Re: [AFMUG] UBNT AC CPE backwards comaptible with Airmax M series
>> AP?
>>
>> If it's a PtP link, where you can switch the roles around and make the AC
>> radio the AP and the Rocket M5 the client, that will work, but if it's a
>> PtMP scenario, the only choices are to use non-AC clients or upgrade the AP
>> to AC.
>>
>> On Mon, Nov 20, 2017 at 10:59 AM, Joe Novak <[email protected]> wrote:
>>>
>>> M5 APs can only have M5 clients, AC APs can have both AC and M series
>>> clients... so assuming you have your model number correct the Nanobeam M5
>>> will work fine to a M5 AP. But the Nanobeam 5AC will not connect to a M5 ap.
>>>
>>> On Mon, Nov 20, 2017 at 10:56 AM, Sam Lambie <[email protected]>
>>> wrote:
>>>>
>>>> Hey all,
>>>>
>>>> Can I install NBE-M5-16 to a Rocket M5 AP? Or do I have to upgrade the
>>>> AP as well?
>>>>
>>>> Thanks
>>>> Sam
>>>>
>>>> --
>>>> --
>>>> Sam Lambie
>>>> Taosnet Wireless Tech.
>>>> 575-758-7598 Office
>>>> www.Taosnet.com
>>>
>>>
>>
>>
>

Reply via email to