Maybe with CNUT? I've never tried it. There's a 'Set CPE Access' in CNUT
tools menu. I think that only modifies the SNMP accessible subnets
though and does not enable read/write. I could be wrong. If someone else
here doesn't know, maybe open a ticket with Cambium support or post up
on the community site.
On 12/26/2017 7:08 AM, Andreas Wiatowski wrote:
SNMP write is off, is there a way to turn that up enmass?
Cheers,
Andreas Wiatowski, CEO
Silo Wireless Inc.
1-866-727-4138 x-600
http://www.silowireless.com
Wireless | Fibre | VoIP | PBX | IPTV
On Dec 25, 2017, at 4:58 PM, George Skorup <george.sko...@cbcast.com
<mailto:george.sko...@cbcast.com>> wrote:
If you have SNMP write enabled on the SMs, then use the AP's SNMP
proxy. IIRC, it's something like <AP proxy OID>.LUID.<SM target OID
of interest>. Should be in the AP MIB.
On 12/25/2017 11:36 AM, Andreas Wiatowski wrote:
Hi Everyone,
We have turned up the on premise version of cnMaestro and it turns
up like a charm.� Kudos to the Cambium team! We use PROXMOX, a free
virtualization product. All we had to do is untar the OVA pull out
the vmdk and convert to qcow2.
So, we have been a CNUT shop.� CNUT works well through web proxy and
we have never seen a need to put a mgmnt IP on the SM.� Now that we
want to use the on premise, we are taking our entire network up to
15.1.2.1 and we are enabling remote management on the WAN for NAT SM
and turning on ICMP.� For bridged we are enabling public access and
DHCP so it grabs an address for management.� ALL is working well BUT
we need to log into each and every SM and make these changes.
My question is, is there an easier way?� We have a custom r/w string
in each SM, but no IP access, just WEB PROXY.
Any help is appreciated, we have 100's of AP and 1000's of SM in the
field.
Cheers,
Andreas Wiatowski, CEO
Silo Wireless Inc.
1-866-727-4138 x-600
http://www.silowireless.com <http://www.silowireless.com/>
Wireless | Fibre | VoIP | PBX | IPTV
Silo Wireless is a Proud Member of:
CanWISP http://www.canwisp.ca
WISPA http://wispa.org
Brantford Brant Chamber of Commerce
Paris Chamber of Commerce
Cambridge Chamber of Commerce
_________________________________
The contents of this email message and any attachments are intended
solely for the addressee(s) and may contain confidential and/or
privileged information and may be legally protected from disclosure.
If you are not the intended recipient of this message or their
agent, or if this message has been addressed to you in error, please
immediately alert the sender by reply email and then delete this
message and any attachments. If you are not the intended recipient,
you are hereby notified that any use, dissemination, copying, or
storage of this message or its attachments is strictly prohibited.