Correct...option 43 is working because soon as I enable icmp and remote management to use the RF IP it connects to cnMaestro after a reboot.
>From what am gathering I need to turn on snmp write across the board and >possibly use an snmp tool to send snmp commands to each sm via the Ap IP and >corresponding LUID ... otherwise, we will need to login to every am manually >and make changes. Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com Wireless | Fibre | VoIP | PBX | IPTV On Dec 26, 2017, at 11:25 AM, George Skorup <george.sko...@cbcast.com<mailto:george.sko...@cbcast.com>> wrote: I think what he's trying to do though is enable the DHCP client on all of the SMs. So Option 43 w/o the SM looking for it is kinda moot. On 12/26/2017 7:17 AM, Adam Moffett wrote: I did that once with a macro plugin in Firefox. I had the macro loop through the RF Private IP range until the highest LUID number on the AP, then ran it again for each AP. That still wasn't very fast. Can you distribute the CnMaestro URL with Option 43? That works on EPMP as long as you haven't already set the URL to something. ------ Original Message ------ From: "Andreas Wiatowski" <andr...@silowireless.com<mailto:andr...@silowireless.com>> To: "af@afmug.com"<mailto:af@afmug.com> <af@afmug.com<mailto:af@afmug.com>> Sent: 12/26/2017 8:08:32 AM Subject: Re: [AFMUG] Mass changes to specific config on 450 network SNMP write is off, is there a way to turn that up enmass? Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com Wireless | Fibre | VoIP | PBX | IPTV On Dec 25, 2017, at 4:58 PM, George Skorup <george.sko...@cbcast.com<mailto:george.sko...@cbcast.com>> wrote: If you have SNMP write enabled on the SMs, then use the AP's SNMP proxy. IIRC, it's something like <AP proxy OID>.LUID.<SM target OID of interest>. Should be in the AP MIB. On 12/25/2017 11:36 AM, Andreas Wiatowski wrote: Hi Everyone, We have turned up the on premise version of cnMaestro and it turns up like a charm. Kudos to the Cambium team! We use PROXMOX, a free virtualization product. All we had to do is untar the OVA pull out the vmdk and convert to qcow2. So, we have been a CNUT shop. CNUT works well through web proxy and we have never seen a need to put a mgmnt IP on the SM. Now that we want to use the on premise, we are taking our entire network up to 15.1.2.1 and we are enabling remote management on the WAN for NAT SM and turning on ICMP. For bridged we are enabling public access and DHCP so it grabs an address for management. ALL is working well BUT we need to log into each and every SM and make these changes. My question is, is there an easier way? We have a custom r/w string in each SM, but no IP access, just WEB PROXY. Any help is appreciated, we have 100's of AP and 1000's of SM in the field. Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com<http://www.silowireless.com/> Wireless | Fibre | VoIP | PBX | IPTV Silo Wireless is a Proud Member of: CanWISP http://www.canwisp.ca WISPA http://wispa.org Brantford Brant Chamber of Commerce Paris Chamber of Commerce Cambridge Chamber of Commerce _________________________________ The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibited.
