The 450M needs 50w? I thought only the AirFiber needed that much power. Keep in mind that this cable is 23G. Without running the numbers, I'm pretty sure that still works and if it doesn't, Chuck's would.
Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino A. Villarini Sent: Friday, December 29, 2017 10:22 AM To: af@afmug.com Subject: Re: [AFMUG] 450M maximum length of Cat5e (Just for power) Yeah but it requires over 50W iirc vs a UBNT AP 8-10w From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> Reply-To: "af@afmug.com<mailto:af@afmug.com>" <af@afmug.com<mailto:af@afmug.com>> Date: Friday, December 29, 2017 at 12:22 PM To: "af@afmug.com<mailto:af@afmug.com>" <af@afmug.com<mailto:af@afmug.com>> Subject: Re: [AFMUG] 450M maximum length of Cat5e (Just for power) Isn't the 450m 48v? Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino A. Villarini Sent: Friday, December 29, 2017 9:19 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] 450M maximum length of Cat5e (Just for power) Power consumption from the 450M is very different form a UBNT Unifi AP... just saying! From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> Reply-To: "af@afmug.com<mailto:af@afmug.com>" <af@afmug.com<mailto:af@afmug.com>> Date: Friday, December 29, 2017 at 12:04 PM To: "af@afmug.com<mailto:af@afmug.com>" <af@afmug.com<mailto:af@afmug.com>> Subject: Re: [AFMUG] 450M maximum length of Cat5e (Just for power) If you use 23G Cat-6, you should be fine. We just connected a Ubiquiti Unifi radio at 490' and it's running fine. We used Primus direct burial cable for this run. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Andreas Wiatowski Sent: Friday, December 29, 2017 7:15 AM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] 450M maximum length of Cat5e (Just for power) Good Morning, We have a couple of large towers where we will be installing 450M with fibre. To power we, would like to use the CMM5 , but we are unsure if we can power the M sufficiently over such a long CAT 5 run. Does anyone have the answer to this? We could see cat5 runs (Shielded and gell filled) of upto 500ft! Cheers, Andreas Wiatowski, CEO Silo Wireless Inc. 1-866-727-4138 x-600 http://www.silowireless.com<http://www.silowireless.com/> Wireless | Fibre | VoIP | PBX | IPTV Silo Wireless is a Proud Member of: CanWISP http://www.canwisp.ca WISPA http://wispa.org Brantford Brant Chamber of Commerce Paris Chamber of Commerce Cambridge Chamber of Commerce _________________________________ The contents of this email message and any attachments are intended solely for the addressee(s) and may contain confidential and/or privileged information and may be legally protected from disclosure. If you are not the intended recipient of this message or their agent, or if this message has been addressed to you in error, please immediately alert the sender by reply email and then delete this message and any attachments. If you are not the intended recipient, you are hereby notified that any use, dissemination, copying, or storage of this message or its attachments is strictly prohibited.