Yes, but is it tested to the more rigorous –40F?

From: Harold Bledsoe 
Sent: Tuesday, February 20, 2018 2:48 PM
To: [email protected] 
Subject: Re: [AFMUG] its here, Ignitenet 60ghz trisector

It's tested to -40C.  If that makes you feel better.  :-) 

-Hal


On Tue, Feb 20, 2018 at 2:10 PM Colin Stanners <[email protected]> wrote:

  Speed and price look extremely impressive... but it's not rated to operate in 
cold weather (only down to -30 Celsius) therefore not an option for us in 
why-are-you-living-there central Canada.


  On Tue, Feb 20, 2018 at 1:47 PM, Stefan Englhardt <[email protected]> wrote:

    Still everything on plain 802.11 or is tdma done?





    Von: Af [mailto:[email protected]] Im Auftrag von Mathew Howard
    Gesendet: Dienstag, 20. Februar 2018 19:45
    An: af <[email protected]>
    Betreff: Re: [AFMUG] its here, Ignitenet 60ghz trisector



    Pricing isn't bad at all, the AP is only about $1k, which is actually 
cheaper than a lot of 5ghz systems when you consider that it covers 360 
degrees, and there aren't any other antennas involved. The clients are a bit 
pricey though... ranging from around $300-$600... realistically, probably 
around $500 for most customers.

    I have one sitting here ready to go up as soon as the weather is good 
enough that I can get myself to climb up a tower... one of our service techs 
lives close enough to the tower that I'm planning on putting it on to work at 
60ghz, so that should be a good test.

    On Tue, Feb 20, 2018 at 12:28 PM, <[email protected]> wrote:

      Nice.  How does the price compare to other PMP solutions?



      From: Mathew Howard 

      Sent: Tuesday, February 20, 2018 11:25 AM

      To: af 

      Subject: Re: [AFMUG] its here, Ignitenet 60ghz trisector



      It is dual frequency. It's got a built in 5ghz omni as well as the three 
60ghz radio... it actually has a 2.4ghz radio in there to, although I can't 
imagine actually using that.



      On Tue, Feb 20, 2018 at 11:43 AM, <[email protected]> wrote:

        Please forgive me for being ignorant about this product, but is it a 
dual freq with fail over to 5.8GHz during 60 GHz fades/outages or do you put up 
the 60 GHz and hope for the best?



        From: Gino A. Villarini 

        Sent: Tuesday, February 20, 2018 10:29 AM

        To: [email protected] 

        Subject: Re: [AFMUG] its here, Ignitenet 60ghz trisector



        2.5 gbps OTA per sector, 3 inside … 1.1-1.3 gbps real per sector 



        From: Af <[email protected]> on behalf of Jason McKemie 
<[email protected]>
        Reply-To: "[email protected]" <[email protected]>
        Date: Tuesday, February 20, 2018 at 1:13 PM
        To: "[email protected]" <[email protected]>
        Subject: Re: [AFMUG] its here, Ignitenet 60ghz trisector



        What's the beamwidth on this?

        On Tuesday, February 20, 2018, Gino A. Villarini <[email protected]> 
wrote:





                Gino A. Villarini
               
                President
               
                Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
               


           


              Gino A. Villarini
             
              President
             
              Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
             


         

Reply via email to