Btw Hal, do the units have electrical downtilt? From: Af <[email protected]<mailto:[email protected]>> on behalf of Harold Bledsoe <[email protected]<mailto:[email protected]>> Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Date: Tuesday, February 20, 2018 at 5:53 PM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [AFMUG] its here, Ignitenet 60ghz trisector
Imperialist! Gino A. Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png] On Tue, Feb 20, 2018 at 3:51 PM <[email protected]<mailto:[email protected]>> wrote: Yes, but is it tested to the more rigorous –40F? From: Harold Bledsoe Sent: Tuesday, February 20, 2018 2:48 PM To: [email protected] Subject: Re: [AFMUG] its here, Ignitenet 60ghz trisector It's tested to -40C. If that makes you feel better. :-) -Hal On Tue, Feb 20, 2018 at 2:10 PM Colin Stanners <[email protected]> wrote: Speed and price look extremely impressive... but it's not rated to operate in cold weather (only down to -30 Celsius) therefore not an option for us in why-are-you-living-there central Canada. On Tue, Feb 20, 2018 at 1:47 PM, Stefan Englhardt <[email protected]> wrote: Still everything on plain 802.11 or is tdma done? Von: Af [mailto:[email protected]] Im Auftrag von Mathew Howard Gesendet: Dienstag, 20. Februar 2018 19:45 An: af <[email protected]> Betreff: Re: [AFMUG] its here, Ignitenet 60ghz trisector Pricing isn't bad at all, the AP is only about $1k, which is actually cheaper than a lot of 5ghz systems when you consider that it covers 360 degrees, and there aren't any other antennas involved. The clients are a bit pricey though... ranging from around $300-$600... realistically, probably around $500 for most customers. I have one sitting here ready to go up as soon as the weather is good enough that I can get myself to climb up a tower... one of our service techs lives close enough to the tower that I'm planning on putting it on to work at 60ghz, so that should be a good test. On Tue, Feb 20, 2018 at 12:28 PM, <[email protected]> wrote: Nice. How does the price compare to other PMP solutions? From: Mathew Howard Sent: Tuesday, February 20, 2018 11:25 AM To: af Subject: Re: [AFMUG] its here, Ignitenet 60ghz trisector It is dual frequency. It's got a built in 5ghz omni as well as the three 60ghz radio... it actually has a 2.4ghz radio in there to, although I can't imagine actually using that. On Tue, Feb 20, 2018 at 11:43 AM, <[email protected]> wrote: Please forgive me for being ignorant about this product, but is it a dual freq with fail over to 5.8GHz during 60 GHz fades/outages or do you put up the 60 GHz and hope for the best? From: Gino A. Villarini Sent: Tuesday, February 20, 2018 10:29 AM To:[email protected] Subject: Re: [AFMUG] its here, Ignitenet 60ghz trisector 2.5 gbps OTA per sector, 3 inside … 1.1-1.3 gbps real per sector From: Af <[email protected]> on behalf of Jason McKemie <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Tuesday, February 20, 2018 at 1:13 PM To: "[email protected]" <[email protected]> Subject: Re: [AFMUG] its here, Ignitenet 60ghz trisector What's the beamwidth on this? On Tuesday, February 20, 2018, Gino A. Villarini <[email protected]> wrote: Gino A. Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [image001.png] Gino A. Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [image001.png]
