If you can just plug into their D Mark point and move fiber I don’t even see why I would tell them, I would try to leave their fiber patch box in place and just run a new longer patch cable to your new location
> On Apr 1, 2018, at 16:28, Kurt Fankhauser <lists.wavel...@gmail.com> wrote: > > should i even tell spectrum what im doing or just do it? > >> On Sun, Apr 1, 2018 at 9:35 AM, Chris Fabien <ch...@lakenetmi.com> wrote: >> In all seriousness I would just move it yourself, if you don't have the >> ability just find a splicer to do it on a Saturday. If you send some pics we >> can give further advice but this is straightforward for any fiber tech to >> do. >> >>> On Sun, Apr 1, 2018, 8:26 AM Kurt Fankhauser <lists.wavel...@gmail.com> >>> wrote: >>> Need to move it because building a data center in an existing building and >>> the finished room will be tornado proof which the original demarc location >>> is not. >>> >>>> On Sat, Mar 31, 2018 at 1:47 PM, Matt Hoppes >>>> <mattli...@rivervalleyinternet.net> wrote: >>> >>>> Or just let it be and run new fiber from the DMarc to the NID or your >>>> router. >>>> >>>> Why do you need to move the dmarc? >>>> >>>>> On Mar 31, 2018, at 13:13, TJ Trout <t...@voltbb.com> wrote: >>>>> >>>>> move it yourself. If it was cat5 you wouldn't have a problem right? Fiber >>>>> is easier to work on then cat5 in my opinion, it seems intimidating but >>>>> it's not. Get some AFL fast connectors and a coupler and move that B**** >>>>> >>>>>> On Sat, Mar 31, 2018 at 6:00 AM, Chuck McCown <ch...@wbmfg.com> wrote: >>>>>> Just go tear it off the building. Put up some siding or something. >>>>>> Call in a trouble. When they come out blame some other contractor. >>>>>> >>>>>> From: Adam Moffett >>>>>> Sent: Saturday, March 31, 2018 6:32 AM >>>>>> To: af@afmug.com >>>>>> Subject: Re: [AFMUG] Spectrum fiber demarc move >>>>>> >>>>>> You should add an "lol" or a smiley face or something so that readers >>>>>> know you're joking. >>>>>> >>>>>> >>>>>> ------ Original Message ------ >>>>>> From: "Chris Fabien" <ch...@lakenetmi.com> >>>>>> To: af@afmug.com >>>>>> Sent: 3/30/2018 12:55:43 PM >>>>>> Subject: Re: [AFMUG] Spectrum fiber demarc move >>>>>> >>>>>>> No, you say it's always been installed here, your records must be >>>>>>> wrong, now get to fixing it, SLA clock is ticking.... >>>>>>> >>>>>>>> On Fri, Mar 30, 2018, 10:44 AM Kurt Fankhauser >>>>>>>> <lists.wavel...@gmail.com> wrote: >>>>>>>> I probably could that would be interesting if i called tech support >>>>>>>> and said i tried moving the fiber now it dont work. >>>>>>>> >>>>>>>>> On Sun, Mar 25, 2018 at 5:17 PM, Chris Fabien <ch...@lakenetmi.com> >>>>>>>>> wrote: >>>>>>>> >>>>>>>>> Can you just move it yourself? We have done that before. >>>>>>>>> >>>>>>>>>> On Sun, Mar 25, 2018, 3:41 AM Kurt Fankhauser >>>>>>>>>> <lists.wavel...@gmail.com> wrote: >>>>>>>>>> Has anyone had to move their demarc locaiton in a building for the >>>>>>>>>> spectrum/time warner fiber service and what was the process like? >>>>>>>>>> Did they charge you for the move of the demarc spot? How much of a >>>>>>>>>> PITA was it to move it? >