as long as the network stays running, thats the biggest thing i need to worry about....
On Sun, Apr 1, 2018 at 5:02 PM, Darin Steffl <darin.ste...@mnwifi.com> wrote: > If you have a tornado or fire, don't you have bigger things to worry > about? > > On Sun, Apr 1, 2018, 3:37 PM Kurt Fankhauser <lists.wavel...@gmail.com> > wrote: > >> Matt, but then if i get hit by a tornado or have a fire contained in part >> of the building the original demarc location is going to melt down while >> the rest of the equipment is in the more secure room so the whole circuit >> is down which makes me feel un-easy. >> >> On Sun, Apr 1, 2018 at 4:32 PM, Matt Hoppes <mattlists@ >> rivervalleyinternet.net> wrote: >> >>> If you can just plug into their D Mark point and move fiber I don’t even >>> see why I would tell them, I would try to leave their fiber patch box in >>> place and just run a new longer patch cable to your new location >>> >>> On Apr 1, 2018, at 16:28, Kurt Fankhauser <lists.wavel...@gmail.com> >>> wrote: >>> >>> should i even tell spectrum what im doing or just do it? >>> >>> On Sun, Apr 1, 2018 at 9:35 AM, Chris Fabien <ch...@lakenetmi.com> >>> wrote: >>> >>>> In all seriousness I would just move it yourself, if you don't have the >>>> ability just find a splicer to do it on a Saturday. If you send some pics >>>> we can give further advice but this is straightforward for any fiber tech >>>> to do. >>>> >>>> On Sun, Apr 1, 2018, 8:26 AM Kurt Fankhauser <lists.wavel...@gmail.com> >>>> wrote: >>>> >>>>> Need to move it because building a data center in an existing building >>>>> and the finished room will be tornado proof which the original demarc >>>>> location is not. >>>>> >>>>> On Sat, Mar 31, 2018 at 1:47 PM, Matt Hoppes <mattlists@ >>>>> rivervalleyinternet.net> wrote: >>>>> >>>>>> Or just let it be and run new fiber from the DMarc to the NID or your >>>>>> router. >>>>>> >>>>>> Why do you need to move the dmarc? >>>>>> >>>>>> On Mar 31, 2018, at 13:13, TJ Trout <t...@voltbb.com> wrote: >>>>>> >>>>>> move it yourself. If it was cat5 you wouldn't have a problem right? >>>>>> Fiber is easier to work on then cat5 in my opinion, it seems intimidating >>>>>> but it's not. Get some AFL fast connectors and a coupler and move that >>>>>> B**** >>>>>> >>>>>> On Sat, Mar 31, 2018 at 6:00 AM, Chuck McCown <ch...@wbmfg.com> >>>>>> wrote: >>>>>> >>>>>>> Just go tear it off the building. Put up some siding or something. >>>>>>> Call in a trouble. When they come out blame some other contractor. >>>>>>> >>>>>>> *From:* Adam Moffett >>>>>>> *Sent:* Saturday, March 31, 2018 6:32 AM >>>>>>> *To:* af@afmug.com >>>>>>> *Subject:* Re: [AFMUG] Spectrum fiber demarc move >>>>>>> >>>>>>> You should add an "lol" or a smiley face or something so that >>>>>>> readers know you're joking. >>>>>>> >>>>>>> >>>>>>> ------ Original Message ------ >>>>>>> From: "Chris Fabien" <ch...@lakenetmi.com> >>>>>>> To: af@afmug.com >>>>>>> Sent: 3/30/2018 12:55:43 PM >>>>>>> Subject: Re: [AFMUG] Spectrum fiber demarc move >>>>>>> >>>>>>> >>>>>>> No, you say it's always been installed here, your records must be >>>>>>> wrong, now get to fixing it, SLA clock is ticking.... >>>>>>> >>>>>>> On Fri, Mar 30, 2018, 10:44 AM Kurt Fankhauser < >>>>>>> lists.wavel...@gmail.com> wrote: >>>>>>> >>>>>>>> I probably could that would be interesting if i called tech support >>>>>>>> and said i tried moving the fiber now it dont work. >>>>>>>> >>>>>>>> On Sun, Mar 25, 2018 at 5:17 PM, Chris Fabien <ch...@lakenetmi.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Can you just move it yourself? We have done that before. >>>>>>>>> >>>>>>>>> On Sun, Mar 25, 2018, 3:41 AM Kurt Fankhauser < >>>>>>>>> lists.wavel...@gmail.com> wrote: >>>>>>>>> >>>>>>>>>> Has anyone had to move their demarc locaiton in a building for >>>>>>>>>> the spectrum/time warner fiber service and what was the process >>>>>>>>>> like? Did >>>>>>>>>> they charge you for the move of the demarc spot? How much of a PITA >>>>>>>>>> was it >>>>>>>>>> to move it? >>>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>> >>> >>