Plasma or acetylene. From: Steve Jones Sent: Friday, May 25, 2018 9:16 PM To: [email protected] Subject: Re: [AFMUG] Multiple cable wall pass-through
you want six cables in one hole or 6 holes? 1/2 inch glands is what i use on single cables, available at any hardware store, they have like 3/4" thread, so the lock nut would affix. Theyre cheaper in bulk than a hardware store, like 6 for 30 bucks at hardware store or 50 for 100 bucks in bulk online On Fri, May 25, 2018 at 3:48 PM, Bill Prince <[email protected]> wrote: A 1" conduit bulkhead connector will do the trick. Attach a short length of conduit on the outside with a sweep. If the nipple on the bulkhead connector is not long enough, you can get longer nipples at any hardware store (1" though 3 or 4 inches). bp <part15sbs{at}gmail{dot}com> On 5/25/2018 1:43 PM, Mike Davis wrote: Any suggestions on where to get a cable wall pass-through for a 1/2" steel plate? I am out of ideas of where to try. I need to get 6 cat cables from the inside of a water tower to the outside at the top of the tower. -- Mike Davis General Manager Office: 260-349-1799 Email: [email protected] Alliance Internet Communications | www.allianceinternet.net PO Box 1100 | 1220 South Wayne Street | Angola, IN | 46703 | 260-349-1799
