Intresting, as the manual do state it can work with ios. On 7/22/19, Dane Trethowan <grtd...@internode.on.net> wrote: > I don’t think so. > As soon as I select use as Sound Device from the recorder I get the “Not > Enough Power” message which I’ve seen on other devices before. > > >> On 22 Jul 2019, at 9:53 pm, Aidan <aidan.smartt...@gmail.com> wrote: >> >> Well, the way I understand it is that with ios, you con't just select >> that and off you go, there are more options under the ios section once >> you pressed ok on that. Maybe that's the problem. >> >> On 7/21/19, Dane Trethowan <grtd...@internode.on.net> wrote: >>> I’m doing some tests with the recorder at the moment. >>> Unfortunately I can’t get the recorder to work as a microphone with the >>> iPhone or iPad mini. >>> The battery of the iPad Pro was dead flat so I haven’t ben able to try >>> that >>> though I suspect the results will be the same which is a pity. >>> >>> >>>> On 22 Jul 2019, at 6:49 am, Aidan <aidan.smartt...@gmail.com> wrote: >>>> >>>> I agree. I won't use that allot, but its good to no how to turn it >>>> on/off. >>>> >>>> On 7/21/19, Dane Trethowan <grtd...@internode.on.net> wrote: >>>>> I haven't worked that out yet but I will. >>>>> I should draw your attention to a few things. >>>>> The Pre-Record buffer is only 2 seconds in length. >>>>> The buffer may not always work depending on what function of recording >>>>> you >>>>> are using, it will not work with the "Countdown Timer" function I >>>>> think >>>>> its >>>>> call. >>>>> Given that this recorder is priced as low as it is these minor >>>>> oddities >>>>> seem >>>>> a fair tradeoff and don't affect the recorders prime aim which is to >>>>> make >>>>> some damn decent quality recordings. >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Aidan >>>>> Sent: Sunday, 21 July 2019 11:56 PM >>>>> To: all-audio@groups.io >>>>> Subject: Re: [all-audio] Getting my Mac to recognize Zoom H1N as >>>>> external >>>>> drive >>>>> >>>>> So, could you figure out how to get pre record switched on or off, and >>>>> when >>>>> play back, things like repeat and AB repeat and playback speed? >>>>> The manual dos not clearly state button combinations there. >>>>> >>>>> On 7/18/19, Dane Trethowan <grtd...@internode.on.net> wrote: >>>>>> As far as I know the only other option available might be for >>>>>> actually >>>>>> powering the device itself. >>>>>> There's no trouble in using the H1N with an IOS device for input and >>>>>> output. >>>>>> >>>>>> >>>>>> -----Original Message----- >>>>>> From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Aidan >>>>>> Sent: Friday, 19 July 2019 1:29 AM >>>>>> To: all-audio@groups.io >>>>>> Subject: Re: [all-audio] Getting my Mac to recognize Zoom H1N as >>>>>> external drive >>>>>> >>>>>> Thanks dain this is what I always wanted to know. Do you perhaps no >>>>>> if >>>>>> there are other options on that USB screen, and how it will work when >>>>>> connecting it to ios for sound use. >>>>>> >>>>>> On 7/17/19, Dane Trethowan <grtd...@internode.on.net> wrote: >>>>>>> Okay here’s what you do. >>>>>>> You first need to turn the power on for the H1N recorder and wait >>>>>>> until the recorder is booted. >>>>>>> Then connect the USB cable from the recorder to the computer. >>>>>>> At this point the USB connection screen displays on the recorder. >>>>>>> Here’s where you need to use the 4 keys below the display mentioned >>>>>>> previously so to get to Card Reader press `Limiter key - that’s the >>>>>>> 3rd key from the left - and then press Auto level key - that’s the >>>>>>> right most key on the row, the forth. - You should now be able to >>>>>>> use >>>>>>> the recorder as a USB Card reader. >>>>>>> When finished make sure to “Safely Eject” the H1N from your computer >>>>>>> system in which ever way your computer handles it. >>>>>>> Now going back to the USB screen for a moment. >>>>>>> If you press the Auto Level key twice then you will set the recorder >>>>>>> to USB Sound Device mode. >>>>>>> I’ve tried all this on both a Mac and Windows machine. >>>>>>> Hope this helps. >>>>>>> >>>>>>> >>>>>>>> On 17 Jul 2019, at 10:36 pm, Mike Busboom <mbusb...@gmail.com> >>>>>>>> wrote: >>>>>>>> >>>>>>>> Hi everyone, >>>>>>>> >>>>>>>> can someone tell me how to get my Mac or PC to recognize my Zoom >>>>>>>> H1N >>>>>>>> as a hard drive? >>>>>>>> >>>>>>>> In terms of nomenclature, I call the horizontal buttons immediately >>>>>>>> below the display, from left to right, H1 through H4. I call the >>>>>>>> buttons below the Record button, B1 through B4, with B1 and B2 in >>>>>>>> the top row and B3 and >>>>>>>> B4 on the bottom row. >>>>>>>> >>>>>>>> What key combination do I need to press in order to make either a >>>>>>>> Mac or PC recognize the H1N as a hard drive? >>>>>>>> >>>>>>>> Thanks and all the best, >>>>>>>> >>>>>>>> Mike >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>> >>> >>> >>> >>> >> >> >> > > > > >
-=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#2560): https://groups.io/g/all-audio/message/2560 Mute This Topic: https://groups.io/mt/32502774/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
