Yes you’re absolutely right so I’m wondering if I have a faulty camera kit here? Camera Kits aren’t expensive items so I’ll order another in a couple of days.
> On 23 Jul 2019, at 12:08 am, Aidan <aidan.smartt...@gmail.com> wrote: > > Intresting, as the manual do state it can work with ios. > > On 7/22/19, Dane Trethowan <grtd...@internode.on.net> wrote: >> I don’t think so. >> As soon as I select use as Sound Device from the recorder I get the “Not >> Enough Power” message which I’ve seen on other devices before. >> >> >>> On 22 Jul 2019, at 9:53 pm, Aidan <aidan.smartt...@gmail.com> wrote: >>> >>> Well, the way I understand it is that with ios, you con't just select >>> that and off you go, there are more options under the ios section once >>> you pressed ok on that. Maybe that's the problem. >>> >>> On 7/21/19, Dane Trethowan <grtd...@internode.on.net> wrote: >>>> I’m doing some tests with the recorder at the moment. >>>> Unfortunately I can’t get the recorder to work as a microphone with the >>>> iPhone or iPad mini. >>>> The battery of the iPad Pro was dead flat so I haven’t ben able to try >>>> that >>>> though I suspect the results will be the same which is a pity. >>>> >>>> >>>>> On 22 Jul 2019, at 6:49 am, Aidan <aidan.smartt...@gmail.com> wrote: >>>>> >>>>> I agree. I won't use that allot, but its good to no how to turn it >>>>> on/off. >>>>> >>>>> On 7/21/19, Dane Trethowan <grtd...@internode.on.net> wrote: >>>>>> I haven't worked that out yet but I will. >>>>>> I should draw your attention to a few things. >>>>>> The Pre-Record buffer is only 2 seconds in length. >>>>>> The buffer may not always work depending on what function of recording >>>>>> you >>>>>> are using, it will not work with the "Countdown Timer" function I >>>>>> think >>>>>> its >>>>>> call. >>>>>> Given that this recorder is priced as low as it is these minor >>>>>> oddities >>>>>> seem >>>>>> a fair tradeoff and don't affect the recorders prime aim which is to >>>>>> make >>>>>> some damn decent quality recordings. >>>>>> >>>>>> >>>>>> -----Original Message----- >>>>>> From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Aidan >>>>>> Sent: Sunday, 21 July 2019 11:56 PM >>>>>> To: all-audio@groups.io >>>>>> Subject: Re: [all-audio] Getting my Mac to recognize Zoom H1N as >>>>>> external >>>>>> drive >>>>>> >>>>>> So, could you figure out how to get pre record switched on or off, and >>>>>> when >>>>>> play back, things like repeat and AB repeat and playback speed? >>>>>> The manual dos not clearly state button combinations there. >>>>>> >>>>>> On 7/18/19, Dane Trethowan <grtd...@internode.on.net> wrote: >>>>>>> As far as I know the only other option available might be for >>>>>>> actually >>>>>>> powering the device itself. >>>>>>> There's no trouble in using the H1N with an IOS device for input and >>>>>>> output. >>>>>>> >>>>>>> >>>>>>> -----Original Message----- >>>>>>> From: all-audio@groups.io <all-audio@groups.io> On Behalf Of Aidan >>>>>>> Sent: Friday, 19 July 2019 1:29 AM >>>>>>> To: all-audio@groups.io >>>>>>> Subject: Re: [all-audio] Getting my Mac to recognize Zoom H1N as >>>>>>> external drive >>>>>>> >>>>>>> Thanks dain this is what I always wanted to know. Do you perhaps no >>>>>>> if >>>>>>> there are other options on that USB screen, and how it will work when >>>>>>> connecting it to ios for sound use. >>>>>>> >>>>>>> On 7/17/19, Dane Trethowan <grtd...@internode.on.net> wrote: >>>>>>>> Okay here’s what you do. >>>>>>>> You first need to turn the power on for the H1N recorder and wait >>>>>>>> until the recorder is booted. >>>>>>>> Then connect the USB cable from the recorder to the computer. >>>>>>>> At this point the USB connection screen displays on the recorder. >>>>>>>> Here’s where you need to use the 4 keys below the display mentioned >>>>>>>> previously so to get to Card Reader press `Limiter key - that’s the >>>>>>>> 3rd key from the left - and then press Auto level key - that’s the >>>>>>>> right most key on the row, the forth. - You should now be able to >>>>>>>> use >>>>>>>> the recorder as a USB Card reader. >>>>>>>> When finished make sure to “Safely Eject” the H1N from your computer >>>>>>>> system in which ever way your computer handles it. >>>>>>>> Now going back to the USB screen for a moment. >>>>>>>> If you press the Auto Level key twice then you will set the recorder >>>>>>>> to USB Sound Device mode. >>>>>>>> I’ve tried all this on both a Mac and Windows machine. >>>>>>>> Hope this helps. >>>>>>>> >>>>>>>> >>>>>>>>> On 17 Jul 2019, at 10:36 pm, Mike Busboom <mbusb...@gmail.com> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>> Hi everyone, >>>>>>>>> >>>>>>>>> can someone tell me how to get my Mac or PC to recognize my Zoom >>>>>>>>> H1N >>>>>>>>> as a hard drive? >>>>>>>>> >>>>>>>>> In terms of nomenclature, I call the horizontal buttons immediately >>>>>>>>> below the display, from left to right, H1 through H4. I call the >>>>>>>>> buttons below the Record button, B1 through B4, with B1 and B2 in >>>>>>>>> the top row and B3 and >>>>>>>>> B4 on the bottom row. >>>>>>>>> >>>>>>>>> What key combination do I need to press in order to make either a >>>>>>>>> Mac or PC recognize the H1N as a hard drive? >>>>>>>>> >>>>>>>>> Thanks and all the best, >>>>>>>>> >>>>>>>>> Mike >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >> >> >> >> >> > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#2561): https://groups.io/g/all-audio/message/2561 Mute This Topic: https://groups.io/mt/32502774/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
