On Mon, Nov 03, 2003 at 01:20:22PM +0100, Takashi Iwai tiwai-at-suse.de |alsa-devel|
wrote:
> At Sun, 2 Nov 2003 11:46:34 +0000,
> Peter Chapman wrote:
> >
> > I have an SBLive! which came with a Dell Dimension PC. The snd-emu10k1
> > module has been refusing to load ("EMU10K1/Audigy soundcard not found or
> > device busy"), however I found the following patch makes it work:
>
> most likely your ac97 codec chip has the IEC958 control, which
> conflicts with the native emu10k1's control.
> please check /proc/asound/card0/ac97#0 (with your patch).
>
>
Is this what you mean?
$ cat /proc/asound/card0/codec97#0/ac97#0-0
0-0/0: Cirrus Logic CS4297A rev 4
Capabilities : -headphone out-
DAC resolution : 20-bit
ADC resolution : 18-bit
3D enhancement : Crystal Semi 3D Stereo Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : off
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=0 AMAP DSA=0
Extended status :
SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz
I can't find any mention of IEC958, but then I don't really know what
I'm doing! I can check the chips on the card itself when I get home, if
that will help.
Thanks,
Pete
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
