Hi, At Thu, 07 Feb 2002 17:35:37 +0100 (MET), Guenther Sohler wrote: > > Hallo List, > > I migrated to alsa now. I think its a quite good concept, but I think I have > found some bugs > > When I play a midi file to the audixy wavetable synth, and there is a > instrument like a cello which sounds till you switch it off, and you interupt > with CTRL-C it stays hanging. its done with the midi port but > the the port to the audixy synth should do a "all note off" when it is beeing > closed It happend on emu10k1, too. I'll try to find the bug.
> With my audixy all the 4 wavetable ports are fine but the midi ports do not work > If I try to access them, there is following error message issued: > alsa ../../alsa-kernel/pci/emu10k1/emumpu401.c:126 cmd 0xff failed at > 0xd400(status=0xff, data=0xff) > > the same command is repeated with 0x3f isntead of 0xff after 126 Aggh, I find one here. Will be fixed soon. Thanks. > There are nice external-midi devices in /dev/snd where you can put raw midi > data to, but there are no devices which go to the wavetable synth of the audixy > > > Where can i find a description on all the snd midi modules especially not the > pci and the isa but the general ones. snd-virmidi is just an example of a > module i dont know its meaning at all. A brief description is found in alsa-kernel/drivers/virmidi.c. It'd be better to put this info into doc directory.. Takashi _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel