At Sun, 06 Oct 2002 23:25:13 -0500, Philip Thiem wrote: > > I've been running up again the FM synethesis wall with my aopen card and > conflicting information, and finally decided to post to the dev group. > > >From some skimming of technical documentation for ymf754. It looks like > the ymf7xx family has an opl3 capability on the chip, once the nessacary > information is given to the card through a mapped pci configuration > register. Is this correct, so that the card is opl3 compatible once the > ISA legacy device is told where to "listen" for fm commands? > > This all stems from my odessy trying to get fm synth to work on the > YMF744B. I keep getting the feeling I'm overlooking something simple. So > if anyone could offer advice or a plan of attack it would be appreciated. > I've > included a link to copy of my last email with all the gathered information. > The primary things that have changed is adding this line to my modules.conf > options snd-ymfpci snd_mpu_port=0x330 snd_fm_port=0x388 > I don't think much of the other stuff has changed, but could fetch any > required information. Also I don't seem to have any mixer control for a > synth or fm device. I have been running a compile of cvs which I checked > out originally around late-august, tried updating the tree about week > around but I ran into compiles problems. > Here's that link: > http://www.icequake.net/~witwerg/ymfpci.txt > Once I get the modules compiled, I wanted to try cleaning out what I have, > and > reconfiguring with debugging options turned on.
the options look already good. perhaps only the mixer issue. on the YMFPCI chip, the FM might be connected to Aux. try to turn on Aux Playback and raise its volume. Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
