Hi Nehal, thanks for getting back to me on this. In article <[EMAIL PROTECTED]>, Nehal <[EMAIL PROTECTED]> writes >go into the first mixer item (master) in alsamixer and press 'm' , this >will unmute it (it can be muted even though the volume can be changed,) >do the same for 'pcm', and also make sure 'wave' is somewhere around >half way up, then try again...
OK, I ran alsamixer, unmuted all the channels, including master, pcm and wave, and pushed them up to maximum. I then ran aplay to play one of the .wav files in /usr/share/sounds. Still no sound. (One thing which I did notice, however, which might be significant. One of the faders near the extreme right of the alsamixer display is "SBLive analogue/digital output jack". The fader wouldn't move, but if I toggled the muting on/off, there was a pop from the speakers.) -- Peter Duffy ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
