Thanks for your response. However, I don't have the snd_ prefixes in my
modules.conf.

Here's my modules.conf file:

--- BEGIN modules.conf ---

### This file is automatically generated by modules-update
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modules.d and read
# the manpage for modules-update.
#
### modules-update: start processing /etc/modules.d/aliases
# Aliases to tell insmod/modprobe which modules to use 

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off            # Unix
# alias net-pf-2 off            # IPv4
# alias net-pf-3 off            # Amateur Radio AX.25
# alias net-pf-4 off            # IPX
# alias net-pf-5 off            # DDP / appletalk
# alias net-pf-6 off            # Amateur Radio NET/ROM
# alias net-pf-9 off            # X.25
# alias net-pf-10 off           # IPv6
# alias net-pf-11 off           # ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off           # Acorn Econet

alias char-major-10-175 agpgart
alias char-major-10-200 tun
alias char-major-81     bttv
alias char-major-108    ppp_generic
alias /dev/ppp          ppp_generic
alias tty-ldisc-3       ppp_async
alias tty-ldisc-14      ppp_synctty
alias ppp-compress-21   bsd_comp
alias ppp-compress-24   ppp_deflate
alias ppp-compress-26   ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0   loop_gen
alias loop-xfer-3       loop_fish2
alias loop-xfer-gen-10  loop_gen
alias cipher-2          des
alias cipher-3          fish2
alias cipher-4          blowfish
alias cipher-6          idea
alias cipher-7          serp6f
alias cipher-8          mars6
alias cipher-11         rc62
alias cipher-15         dfc2
alias cipher-16         rijndael
alias cipher-17         rc5

# Support for i2c and lm_sensors
alias char-major-89    i2c-dev


### modules-update: end processing /etc/modules.d/aliases

### modules-update: start processing /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header:
/home/cvsroot/gentoo-x86/media-sound/alsa-driver/files/alsa-modules.conf-rc,
v 1.1 2002/12/21 06:31:52 agenkin Exp $

# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore

##
## IMPORTANT:
## You need to customise this section for your specific sound card(s)
## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info.
##
##  ALSA portion
alias snd-card-0 snd-es1688
## alias snd-card-1 snd-ens1371
##  OSS/Free portion
## alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##

# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
##  OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss

alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

# Set this to the correct number of cards.
options snd cards_limit=1

### modules-update: end processing /etc/modules.d/alsa

### modules-update: start processing /etc/modules.d/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### modules-update: end processing /etc/modules.d/i386

--- END modules.conf ---

Any other ideas out there?

Robert Liao

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Clemens Ladisch
Sent: Wednesday, June 18, 2003 9:57 AM
To: Robert Liao
Cc: [EMAIL PROTECTED]
Subject: Re: [Alsa-user] ES1688 Problems on Alsa 0.9.2


Robert Liao wrote:
> /lib/modules/2.4.21/kernel/sound/isa/es1688/snd-es1688.o: init_module: 
> No such device
> Hint: insmod errors can be caused by incorrect module parameters ...
>
> Once again, everything worked with an older version of Alsa, but 
> refuses to work with 0.9.2.
>
> Does anyone out there know how to fix this problem? Did something 
> happen to Alsa that fundamentally changed the way it accesses the 
> hardware?

Yes. All module parameters were renamed. Remove all "snd_" prefixes (but
_not_ "snd-") in modules.conf.


HTH
Clemens




-------------------------------------------------------
This SF.Net email is sponsored by: INetU
Attention Web Developers & Consultants: Become An INetU Hosting Partner.
Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission!
INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user

Reply via email to