Hi, if you ever find the right setup for Digi96/8, please mail me, I have the same problems, and I've given up, I just work with 2 channels/spdif now with this card. (shame on me).
Personally I think it's weird, there should be a toggle in /etc/asound... which makes it either ADAT of SPDIF. Having two devices, and writing to either hw:0,0 or hw:0,1 change the data format is confusing. Cheers, Jeroen. On Sun, 10 Aug 2003 00:37:01 +0300 Panu Maijala <[EMAIL PROTECTED]> wrote: > Hi! > > Shortly: everything else works but ADAT capture fails. > > This is my first time playing with ALSA, so there might be an easy > solution... Anyway, I have now tried one week with two different computers > and installations without results.. so, You are my last hope! > > The sound card is: > # cat /proc/asound/cards > 0 [PST ]: Digi96 - RME Digi96/8 PST > RME Digi96/8 PST at 0xd8000000, irq 9 > > Everything seems to be all right: > # cat /proc/asound/pcm > 00-00: Digi96 IEC958 : Digi96 IEC958 : playback 1 : capture 1 > 00-01: Digi96 ADAT : Digi96 ADAT : playback 1 : capture 1 > > I can playback to and capture from hw:0,0 and playback to hw:0,1 but: > # arecord -D hw:0,1 -t wav -c2 -f s16_le -r44100 -d30 -v test_adat.wav > ALSA lib pcm_hw.c:1055:(snd_pcm_hw_open) open /dev/snd/pcmC0D1c failed: > Input/output error > arecord: main:480: audio open error: Input/output error > > I suppose the ADAT capture thing should exist: > # cat /proc/asound/card0/pcm1c/info > card: 0 > device: 1 > subdevice: 0 > stream: CAPTURE > id: Digi96 ADAT > .. > > The error message remains the same if I change the input (numid=5) from > analog (3) to optical (0). > # cat /proc/asound/card0/rme96 > .. > Input settings > input: analog (2 channels) > sample rate: 44100 Hz > sample format: 16 bit > .. > # cat /proc/asound/card0/rme96 > .. > Input settings > input: optical (8 channels) > sample rate: 44100 Hz > sample format: 16 bit > > The sampling rate (in the "Input settings") will kindly follow the change > in the sampling rate at the ADAT source (Apogee AD-8000), so I think they > are in sync (the red light in the Digi96 rear panel doesn't light). > > An other question is about "sample format: how can I change it from 16-bits > to 24-bits? I'm sure there are 24 bits in the cable but how can I tell it > to the driver? > > > Some background information: > # cat /proc/asound/version > Advanced Linux Sound Architecture Driver Version 0.9.4. > Compiled on Aug 9 2003 for kernel 2.4.20-8 with versioned symbols. > > # cat /proc/asound/devices > 0: [0- 0]: ctl > 17: [0- 1]: digital audio playback > 25: [0- 1]: digital audio capture > 16: [0- 0]: digital audio playback > 24: [0- 0]: digital audio capture > 33: : timer > > # cat /etc/modules.conf > alias eth0 8139too > alias usb-controller usb-uhci > alias char-major-116 snd > options snd snd_major=116 snd_cards_limit=2 > alias snd-card-0 snd-rme96 > alias snd-card-1 es1371 # Didn't exist in the 2nd computer I tried > options snd-rme96 snd_index=0 snd_id="PST" snd_enable=1 > options es1371 snd_index=1 snd_id="ES1371" > alias char-major-14 soundcore > alias sound-slot-0 snd-card-0 > alias sound-service-0-0 snd-mixer-oss > alias sound-service-0-1 snd-seq-oss > alias sound-service-0-3 snd-pcm-oss > alias sound-service-0-8 snd-seq-oss > alias sound-service-0-12 snd-pcm-oss > alias sound-slot-1 snd-card-1 > alias sound-service-1-0 snd-mixer-oss > alias sound-service-1-3 snd-pcm-oss > alias sound-service-1-12 snd-pcm-oss > > --------- /var/log/messages ------------- > .. > Aug 9 22:32:48 akusti kernel: PCI: Found IRQ 9 for device 00:09.0 > Aug 9 22:32:48 akusti kernel: PCI: Sharing IRQ 9 with 00:07.2 > Aug 9 22:32:48 akusti kernel: es1371: version v0.32 time 18:00:00 Mar 13 2003 > Aug 9 22:32:48 akusti kernel: PCI: Found IRQ 10 for device 00:0b.0 > Aug 9 22:32:48 akusti kernel: es1371: found chip, vendor id 0x1274 device > id 0x1371 revision 0x06 > Aug 9 22:32:48 akusti kernel: es1371: found es1371 rev 6 at io 0xe400 irq 10 > Aug 9 22:32:48 akusti kernel: es1371: features: joystick 0x0 > Aug 9 22:32:48 akusti kernel: ac97_codec: AC97 Audio codec, id: CRY3 > (Cirrus Logic CS4297) > Aug 9 22:32:50 akusti modprobe: modprobe: Can't locate module snd-card-2 > Aug 9 22:32:50 akusti modprobe: modprobe: Can't locate module snd-card-2 > Aug 9 22:32:50 akusti modprobe: modprobe: Can't locate module snd-card-3 > Aug 9 22:32:50 akusti modprobe: modprobe: Can't locate module snd-card-3 > ------------------------------------------ > > > I would be grateful fo any assistance! > > panu > > > > ------------------------------------------------------- > This SF.Net email sponsored by: Free pre-built ASP.NET sites including > Data Reports, E-commerce, Portals, and Forums are available now. > Download today and enter to win an XBOX or Visual Studio .NET. > http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 > _______________________________________________ > Alsa-user mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/alsa-user ------------------------------------------------------- This SF.Net email sponsored by: Free pre-built ASP.NET sites including Data Reports, E-commerce, Portals, and Forums are available now. Download today and enter to win an XBOX or Visual Studio .NET. http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01 _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user