> -----Message d'origine----- > De : Takashi Iwai [mailto:[EMAIL PROTECTED] > Envoyé : mardi 23 septembre 2003 15:51 > À : HAMEL Matthias OCISI > Cc : Leandro Dardini; [EMAIL PROTECTED] > Objet : Re: RE : [Alsa-user] spdif on intel 8x0 (nforce2-MCT) > > > At Thu, 18 Sep 2003 23:42:11 +0200, > Matthias Hamel wrote: > > > > > > > > > > Hello, > > > > > I just bought a nforce2-MCT board, an asus a7n8x > deluxe. It performs > > > > > > well with the intel8x0 module, but I notice the > lack of spdif output. > > > > > > I read a post issued _before_ the latest release > about spdif enabled > > > > > > only in the cvs version, but lacking in the last > release, I suppose > > > > > > there is some problem with it... > > > > > > > > > > > > what is the current status of the spdif for the > intel 8x0 chipset? > > > > > > > it's depending on ac97 codec, but in general it should work. > > > > > > What version is needed? I just install the latest > stable, 0.9.6 and the > > > > spdif doesn't show in alsamixer, or maybe it shows but > with a name I don't > > > > recognize... > > > > > try the cvs version. there are many fixes. > > > > > > also note that spdif won't work on OSS emulation. > > > but the program like xine should work fine. > > > > > > I tried it last night, but it did not work. > > I still don't hav any spdif output. > > When running : mplayer -ao alsa9:spdif audiodump.wav > > I get the following errors : > > Playing audiodump.wav > > Audio file detected. > > > ==================================================================== > > Opening audio decoder: [pcm] Uncompressed PCM audio decoder > > AUDIO: 44100 Hz, 2 ch, 16 bit (0x10), ratio: > 176400->176400 (1411.2 kbit) > > Selected audio codec: [pcm] afm:pcm (Uncompressed PCM) > > > ==================================================================== > > Checking audio filter chain for 44100Hz/2ch/16bit -> > 44100Hz/2ch/16bit... > > AF_pre: af format: 2 bps, 2 ch, 44100 hz, little > endian signed int > > AF_pre: 44100Hz 2ch Signed 16-bit (Little-Endian) > > alsa-init: testing and bugreports are welcome. > > alsa-init: requested format: 44100 Hz, 2 channels, > Signed 16-bit (Little- > > Endian) > > alsa-init: soundcard set to spdif > > ALSA lib pcm_hw.c:1055:(snd_pcm_hw_open) open > /dev/snd/pcmC0D1p > > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > here is the problem. > perhaps it's a bug of config file. > > please try to change the line "device 1" to "device 2" > of the definition of iec958 in /usr/share/alsa/cards/NFORCE.conf: > > NFORCE.pcm.iec958.0 { > .... snip ... > slave.pcm { > type hw > card $CARD > ==> device 1 > } > > > please let me know if it solves the problem. > then i'll fix the cvs tree, too. > > > thanks, > > Takashi > >
Still not that ... Now, i get the same message with /dev/snd/pcmC0D2p ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user