Hi Lionel,
Well normally, i use xine as my favourity player, but also here, i dont`t hear
anything. Maybe it is just is simple error, but i started even from scratch,
removing my local xine-Configuration. i may switch on digital passthrough, but
my amp does not get any signal. Yes, it works under M$, yes, it worked with my
old Sblive5.1!
I don`t have a Platinum eX, but an orginary Audigy 2 , but i doubt, that there
are large differences..
Could you show me the output of your /proc/asound/Audigy2/emu10k1? Maybe i find
some differences..
Thanks for your help,
Ingo
Zitat von Lionel Lam <[EMAIL PROTECTED]>:
> Hi Ingo,
>
> I am using the Audigy2 Platinum eX and I managed to get ac3 passthrough
> using Xine and alsa. My connection to an external decoder is done via
> the mini-jack digital output on the breakout box of the soundcard, not
> via the RCA SPDIF output jack. Dolby Digital works perfectly, however
> DTS passthrough seems a little buggy. The decoder detects DTS signals,
> however the sound output is distorted. I have not managed to get ac3
> passthrough using MPlayer at the moment. The passthrough should work
> without any fiddling of alsamixer. I do not have my configuration files
> at the moment as I am currently at work. I suggest that you try using
> Xine to see if ac3 passthrough works on your Audigy2, and I have no
> reason to doubt that it should not if alsa loads without any problems.
>
>
> Ingo Reimann wrote:
>
> >Hi list,
> >
> >i just wanted to ask whether there is any progress in the Audigy2 and
> >ac3-passthrough issue.
> >
> >After screening alsa-user, alsa-devel and also mplayer-uers i am not
> >much happier. I read about a few people, that use toe optical optput on
> >their live-drive, but i only have the "Digital / Analog Output Jack"
> >
> >Would anyone, who managed to use this with his external decoder, be so
> >kind to describe his configuration. Or are we just casing a ghost?
> >
> >cat /proc/asound/ says something about spdif, but when i send anything
> >other than pure pcm to the device, i get no output from my amp.
> >
> >[EMAIL PROTECTED]:~/ftp$ ac3dec -P test.ac3
> >Using PCM device 'plug:iec958:{AES0 0x87 AES1 0x0 AES2 0x0 AES3 0x0}'
> >AC3 Stream 48.0 KHz 192 kbps
> >-> Silence
> >
> >Aborted...
> >[EMAIL PROTECTED]:~/ftp$ ac3dec -C test.ac3
> >Using PCM device 'plug:iec958:{AES0 0x2 AES1 0x82 AES2 0x0 AES3 0x2}'
> >AC3 Stream 48.0 KHz 192 kbps
> >-> Silence
> >
> >[EMAIL PROTECTED]:~/ftp$ ac3dec -R test.ac3
> >2.0 Mode 48.0 KHz 192 kbps Complete Main Audio Service
> >Using PCM device 'plug:iec958:{AES0 0x0 AES1 0x82 AES2 0x0 AES3 0x2}'
> >-> PCM Stereo , no matter how i set "Audigy Analog/Digital Output Jack"
> >and " and "IEC958 Optical Raw" Switches with alsamixer
> >
> >
> >Any help would be kindly accepted
> >
> >best wishes,
> >
> >Ingo
> >[EMAIL PROTECTED]:~/ftp$ cat /proc/asound/Audigy2/emu10k1
> >EMU10K1
> >
> >Card : Audigy
> >Internal TRAM (words) : 0x2000
> >External TRAM (words) : 0x0
> >
> >Effect Send Routing : A=0, B=1, C=2, D=3
> >
> >Captured FX Outputs :
> > Output 00 [PCM Left]
> > Output 12 [MIDI Reverb]
> >
> >All FX Outputs :
> > Output 00 [PCM Left]
> > Output 01 [PCM Right]
> > Output 02 [PCM Surround Left]
> > Output 03 [PCM Surround Right]
> > Output 04 [MIDI Left]
> > Output 05 [MIDI Right]
> > Output 06 [PCM Center]
> > Output 07 [PCM LFE]
> > Output 08 [???]
> > Output 09 [???]
> > Output 10 [???]
> > Output 11 [???]
> > Output 12 [MIDI Reverb]
> > Output 13 [MIDI Chorus]
> > Output 14 [???]
> > Output 15 [???]
> > Output 16 [???]
> > Output 17 [???]
> > Output 18 [ADC Left / CDROM S/PDIF Left]
> > Output 19 [ADC Right / CDROM S/PDIF Right]
> > Output 20 [MIC / Zoom Video Left]
> > Output 21 [Zoom Video Right]
> > Output 22 [S/PDIF Left]
> > Output 23 [S/PDIF Right]
> > Output 24 [???]
> > Output 25 [???]
> > Output 26 [???]
> > Output 27 [???]
> > Output 28 [???]
> > Output 29 [???]
> > Output 30 [???]
> > Output 31 [???]
> >
> >S/PDIF Output 0
> >Professional Mode : no
> >Not Audio Data : no
> >Copyright : yes
> >Emphasis : none
> >Mode : 0
> >Category Code : 0x2
> >Generation Status : original
> >Source Mask : 0
> >Channel Number : unspec
> >Sample Rate : 48000Hz
> >Clock Accuracy : 1000ppm
> >
> >S/PDIF Output 1
> >Professional Mode : no
> >Not Audio Data : no
> >Copyright : yes
> >Emphasis : none
> >Mode : 0
> >Category Code : 0x12
> >Generation Status : original
> >Source Mask : 0
> >Channel Number : left
> >Sample Rate : 48000Hz
> >Clock Accuracy : 1000ppm
> >
> >S/PDIF Output 2/3
> >Professional Mode : no
> >Not Audio Data : no
> >Copyright : yes
> >Emphasis : none
> >Mode : 0
> >Category Code : 0x12
> >Generation Status : original
> >Source Mask : 0
> >Channel Number : left
> >Sample Rate : 48000Hz
> >Clock Accuracy : 1000ppm
> >
> >CD-ROM S/PDIF
> >Professional Mode : yes
> >Not Audio Data : yes
> >Copyright : yes
> >Emphasis : 7
> >Mode : 3
> >Category Code : 0x7f
> >Generation Status : original
> >Source Mask : 15
> >Channel Number : 15
> >Sample Rate : 15Hz
> >Clock Accuracy : unknown
> >S/PDIF Locked : off
> >Rate Locked : off
> >Estimated Sample Rate : 0x0
> >
> >General purpose S/PDIF
> >Professional Mode : yes
> >Not Audio Data : yes
> >Copyright : yes
> >Emphasis : 7
> >Mode : 3
> >Category Code : 0x7f
> >Generation Status : original
> >Source Mask : 15
> >Channel Number : 15
> >Sample Rate : 15Hz
> >Clock Accuracy : unknown
> >S/PDIF Locked : off
> >Rate Locked : off
> >Estimated Sample Rate : 0x0
> >
> >Zoomed Video
> >Rate Locked : off
> >Estimated Sample Rate : 0x0
> >
> >
> >
> >
> >-------------------------------------------------------
> >The SF.Net email is sponsored by EclipseCon 2004
> >Premiere Conference on Open Tools Development and Integration
> >See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> >http://www.eclipsecon.org/osdn
> >_______________________________________________
> >Alsa-user mailing list
> >[EMAIL PROTECTED]
> >https://lists.sourceforge.net/lists/listinfo/alsa-user
> >
> >
> >
>
>
--
Ingo Reimann <[EMAIL PROTECTED]>
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
