Dominique Dumont <[EMAIL PROTECTED]> writes: > James Courtier-Dutton <[EMAIL PROTECTED]> writes: > >> Try a new test. It will not give any sound, but might get the receiver >> to think there is AC3 present. >> >> ./speaker-test -Diec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2 -c2 > > I get a different set of parameter from 'iecset -x' while playing > speaker-test. Is that normal ? > > $ iecset -x > AES0=0x02,AES1=0x00,AES2=0x00,AES3=0x02
This time I'll reply to myself ;-) It's probably not normal. If I remove the following lines from /etc/asoundrc.conf: pcm.!iec958 { type hw card 0 device 2 } I can see that iecset -x output changes when I run: ac3dec -C -Diec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2 dolby.ac3 But I still get no sound. I guess that I must find another way to specify that iec958 is on device 2. ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user