[Reposting to whole list. Ooops] Hi Christian,
I cannot help you with item 1. However, item 2 was something that bit me when I wanted a headless setup using a HDSP9652. I agree, things are pretty clunky. I believe it is a safety feature that all of the hardware mixer values are set to 0 at startup. hdspmixer does indeed set these to more useful values when run. Thankfully, there is support for setting the matrix mixer settings in amixer as well. I had a script that I ran at startup which set things how I needed. The numbering of the channels may make you scratch your head for a few minutes :) Behold! The following: #!/bin/sh # Route software outputs 9-16 to the ADA8000 (on ADAT2 Out) /usr/bin/amixer -q cset numid=5 34,8,32768 /usr/bin/amixer -q cset numid=5 35,9,32768 /usr/bin/amixer -q cset numid=5 36,10,32768 /usr/bin/amixer -q cset numid=5 37,11,32768 /usr/bin/amixer -q cset numid=5 38,12,32768 /usr/bin/amixer -q cset numid=5 39,13,32768 /usr/bin/amixer -q cset numid=5 40,14,32768 /usr/bin/amixer -q cset numid=5 41,15,32768 # Route the ADAT output of the ADA8000 (on ADAT2 In) to the other machine (on ADAT3 Out) /usr/bin/amixer -q cset numid=5 8,16,32768 /usr/bin/amixer -q cset numid=5 9,17,32768 /usr/bin/amixer -q cset numid=5 10,18,32768 /usr/bin/amixer -q cset numid=5 11,19,32768 /usr/bin/amixer -q cset numid=5 12,20,32768 /usr/bin/amixer -q cset numid=5 13,21,32768 /usr/bin/amixer -q cset numid=5 14,22,32768 /usr/bin/amixer -q cset numid=5 15,23,32768 # Route channels 1&2 from the other machine (on ADAT3 In) to the S/PDIF output /usr/bin/amixer -q cset numid=5 16,24,32768 /usr/bin/amixer -q cset numid=5 17,25,32768 # Also route the S/PDIF playback channels (50 & 51) to the S/PDIF output (24 & 25) /usr/bin/amixer -q cset numid=5 50,24,32768 /usr/bin/amixer -q cset numid=5 51,25,32768 # Set the clock source to Master 44.1kHz /usr/bin/amixer -q cset numid=11 2 # Set the preferred sync reference to ADAT2In /usr/bin/amixer -q cset numid=14 4 # Set the ADAT1 input to be S/PDIF /usr/bin/amixer -q cset numid=6 0 # Set ADAT1 output to be S/PDIF /usr/bin/amixer -q cset numid=7 on # Set Professional bit on S/PDIF output /usr/bin/amixer -q cset numid=8 on Hope this helps! Matt On 1 March 2013 13:47, Schmidt, Christian Thorge <c...@radiopark.de> wrote: > Hello all, > > I have an RME HDSP 9652 PCI card[1] installed unter Ubuntu 12.04.1[2], > kernel 3.2.0-33-generic-pae [3]. > > There's two things I need help with: > > 1. Is there a way to use the ADAT outputs of the card under "pure" > ALSA, without jackd? For now I start up jackd and get > system:playback_1 through system:playback_26 but I would very much > like to just use (mplayer-style) hw:0.0 through hw:0.25 - any > ideas/any alsa config files that would help me with this? > > 2. Using jack, I need to start up hdspmixer to hear any sound - > without starting it I see all the jackd outputs, all the jackd inputs, > the routing is ok - but no sound. Starting up hdspmixer gives me sound > on my Behringer ADAT-to-analog outputs. > I suppose hdspmixer sets the volume - I'd like to do this without X > and, most important, without user interaction. So can I copy/activate > the volume settings the same way hdspmixer does from the commandline? > > Thanks for your help, > Christian. > > [1]: 01:0a.0 Multimedia audio controller: Xilinx Corporation RME > Hammerfall DSP (rev 6c) > [2]: Ubuntu 12.04.1 LTS > [3]: Linux music 3.2.0-33-generic-pae #52-Ubuntu SMP Thu Oct 18 > 16:39:21 UTC 2012 i686 athlon i386 GNU/Linux > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_feb > _______________________________________________ > Alsa-user mailing list > Alsa-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/alsa-user ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_mar _______________________________________________ Alsa-user mailing list Alsa-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/alsa-user
