Thanks Keith. I saw the three suggested frequencies in the setup and
assumed that was the extent of my choices. I tried other frequencies
for the beep tone and you are correct again. The lower the frequency the
lower the level so the lower pitch didn't really help. Ended up back
where I started. Another reader suggested using a stethoscope. I can
borrow one from my daughter and will try that out. It is hard enough
to hear the beep tones in my quiet back yard I am concerned that I won't
be able to hear anything out at our launch facility.
Terry
On 4/24/2021 11:04 PM, Keith Packard wrote:
Terry <w7...@cableone.net> writes:
Is there anyway that I can lower the pitch of the mode beeper on my
EasyMini. The two available settings are so high that I have a hard
time hearing them. I would love it if they could be configured to have
a pitch somewhere between 500 and 1000 Hz.
You can type in any value you like; note that the beeper itself isn't
very loud at lower frequencies...
_______________________________________________
altusmetrum mailing list
altusmetrum@lists.gag.com
http://lists.gag.com/mailman/listinfo/altusmetrum
