Leland Dexter <nmrock...@yahoo.com> writes: > Hello again, > While I love all of my Easy Minis my Easy Timer continues to give me > problems. I set "After motor number" = 1 and "Delay after other > condition(s)" = 1.5 hoping to get a 2nd stage motor to fire 1.5 > seconds after booster burnout. Result was a good boost and no > sustainer ignition. Fortunately my Easy Mini riding tandem saved the > rocket.
> Now, to further complicate things, when I try to connect the ET to my > laptop 95% of the time the communications drops after a second or > two. Once I was able to stay connected and was able to reset some > parameters (now going to try "Time since launch greater than" and set > the Delay after other condition(s)" = 3.0 seconds. Any help figuring > out what is going on would be appreciated! That's likely caused by EasyTimer going into 'pad' mode because it wasn't sitting flat on the table. If not, perhaps your accelerometer just needs to be recalibrated. That might also be the cause of the failed ignition. Because EasyTimer doesn't log flight data, we can't diagnose the failure after the flight. -- -keith
signature.asc
Description: PGP signature
_______________________________________________ altusmetrum mailing list -- altusmetrum@lists.gag.com To unsubscribe send an email to altusmetrum-le...@lists.gag.com
