Gene,
Here are the linking errors:
ld:
Unresolved:
ScanBus
SCSI_OpenDevice
SCSI_CloseDevice
Tape_Status
DumpSense
Sense2Action
SCSI_ExecuteCommand
Tape_Ioctl
make: *** [chg-scsi] Error 1
Thanks,
Rob
-----Original Message-----
From: Rob Earl [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 06, 2001 8:45 AM
To: Gene Heskett; John R. Jackson
Cc: [EMAIL PROTECTED]
Subject: RE: chg-scsi
Hi Gene,
Here's what I did.
I went to the sourceforge site to the following link:
http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/amanda/amanda-2/changer-src/
I then downloaded each file and replaced the changer-src directory on my
machine with what I downloaded. I ran ./configure from the Amanda directory
and then ran make. I got errors that there was no Makefile for changer-src.
I noticed that there is only a Makefile.am file in the new changer-src
directory, so I moved the Makefile from the old changer-src to the new. I
ran make again, but chg-scsi did not get built. So I went to the
changer-src directory and ran "make chg-scsi" and got the exact same
unresolved errors that I was getting before. Any ideas to what I'm doing
wrong for the build of this product?
Thanks,
Rob
-----Original Message-----
From: Gene Heskett [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 06, 2001 12:26 AM
To: John R. Jackson
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: chg-scsi
Gene Heskett sends Greetings to John R.;
>>I now have an executable program in the changer-src directory called
>>chg-scsi. ...
>You just think you do :-).
>>I'm thinking this might have something to do with the unresolves during
the
>>build of chg-scsi. ...
>Yup.
>>Is there something special I should set when building the executable?
>As I said, chg-scsi is not maintained in the released branches (I don't
>know the details -- one of the other authors does all the chg-scsi work).
>You'll probably need to get the CVS main branch version. There are
>entries in the FAQ about how to get the CVS code, and my previous letter
>described (although possibly too briefly) what to do with it.
>If you have trouble getting it going, don't hesitate to post.
>>Rob
>John R. Jackson, Technical Software Specialist, [EMAIL PROTECTED]
John and Rob, chg-scsi was just re-worked in the cvs, with the
development work actually being done on my office machine about 2 weeks
back by Thomas Hepper. It now works fairly well with a Seagate 4586NP
changer. The corrected sources s/b in amanda-2/changer-src.
Cheers, Gene
--
Gene Heskett, CET, UHK |Amiga A2k Zeus040, 70MB ram, 31 gigs
| Linux @ 500mhz, 320MB ram, 50 gigs
email gene underscore heskett at iolinc dot net
#Amiga based X10 home automation program EZHome, see at:#
<http://www.iolinc.net/gene_heskett>
This messages reply content, but not any previously quoted material,
is © 2001 by Gene Heskett, all rights reserved.
--
