Hi,
Thanks for your prompt response...below are the debug of output
(/tmp/amanda)...pls check them...I really appreciate your help!!!
[root@apple amanda]# more amtape.20020314082946.debug
amtape: debug 1 pid 20641 ruid 33 euid 33 start time Thu Mar 14
08:29:46 2002
changer: got exit: 0 str: 1 7 1 0
changer: got exit: 0 str: 1 /dev/nst0
changer: got exit: 2 str: DeviceCapabilitiesPage == NULL
could not load slot DeviceCapabilitiesPage: == NULL
amtape: pid 20641 finish time Thu Mar 14 08:31:24 2002
[root@apple amanda]# more chg-scsi.20020314083102.debug
chg-scsi: debug 1 pid 20651 ruid 33 euid 33 start time Thu Mar 14
08:31:02 2002
ARG [0] : /usr/lib/amanda/chg-scsi
ARG [1] : -slot
ARG [2] : next
Number of configurations: 1
Tapes need eject: Yes
barcode reader : No
Tapes need sleep: 70 seconds
Cleancycles : 20
Changerdevice : /dev/sgb
Tapeconfig Nr: 0
Drivenumber : 0
Startslot : 0
Endslot : 6
Cleanslot : -1
Devicename : /dev/nst0
changerident : none
SCSITapedev : none
tapeident : none
statfile : none
Slotfile : /etc/amanda/DailySet1/tape5-slot
Cleanfile : /etc/amanda/DailySet1/tape0-clean
Usagecount : /etc/amanda/DailySet1/totaltime
##### START OpenDevice
OpenDevice : /dev/sgb
SCSI_OpenDevice : use SG interface
SCSI_OpenDevice : current timeout 6000
SCSI_OpenDevice : timeout set to 60000
##### START SCSI_Inquiry
SCSI_Inquiry start length = 56:
##### START DecodeSCSI
SCSI_ExecuteCommand : INQUIRY 12 00 00 00 38 00
##### STOP DecodeSCSI
08 80 02 02 33 00 00 00 41 44 49 43 20 20 20 20 ....3...ADIC....
46 61 73 74 53 74 6F 72 20 44 4C 54 20 20 20 20 FastStor.DLT....
30 31 31 38 00 00 00 00 00 00 00 00 00 00 00 00 0118............
00 00 00 00 00 00 00 00
SCSI_Inquiry : end 0
##### START PrintInquiry
qualifier 0
type 8
data_format 2
ansi_version 2
ecma_version 0
iso_version 0
type_modifier 0
removable 1
vendor_info ADIC
prod_ident FastStor DLT
prod_version 0118
vendor_specific
using ident = generic, type = Generic driver tape/robot [generic]
##### START OpenDevice
OpenDevice : /dev/nst0
SCSI_OpenDevice : checking if /dev/nst0 is a sg device
No link /dev/nst0
using ident = generic, type = Generic driver tape/robot [generic]
need_eject set to 2
###### START get_drive_count
get_drive_count : fd 3
##### START GenericElementStatus
##### START SCSI_ModeSense
SCSI_ModeSense start length = 255:
##### START DecodeSCSI
SCSI_ExecuteCommand : MODE SENSE 1A 08 3F 00 FF 00
##### STOP DecodeSCSI
[root@apple amanda]# clear
[root@apple amanda]# more chg-scsi.20020314083102.debug
chg-scsi: debug 1 pid 20651 ruid 33 euid 33 start time Thu Mar 14
08:31:02 2002
ARG [0] : /usr/lib/amanda/chg-scsi
ARG [1] : -slot
ARG [2] : next
Number of configurations: 1
Tapes need eject: Yes
barcode reader : No
Tapes need sleep: 70 seconds
Cleancycles : 20
Changerdevice : /dev/sgb
Tapeconfig Nr: 0
Drivenumber : 0
Startslot : 0
Endslot : 6
Cleanslot : -1
Devicename : /dev/nst0
changerident : none
SCSITapedev : none
tapeident : none
statfile : none
Slotfile : /etc/amanda/DailySet1/tape5-slot
Cleanfile : /etc/amanda/DailySet1/tape0-clean
Usagecount : /etc/amanda/DailySet1/totaltime
##### START OpenDevice
OpenDevice : /dev/sgb
SCSI_OpenDevice : use SG interface
SCSI_OpenDevice : current timeout 6000
SCSI_OpenDevice : timeout set to 60000
##### START SCSI_Inquiry
SCSI_Inquiry start length = 56:
##### START DecodeSCSI
SCSI_ExecuteCommand : INQUIRY 12 00 00 00 38 00
##### STOP DecodeSCSI
08 80 02 02 33 00 00 00 41 44 49 43 20 20 20 20 ....3...ADIC....
46 61 73 74 53 74 6F 72 20 44 4C 54 20 20 20 20 FastStor.DLT....
30 31 31 38 00 00 00 00 00 00 00 00 00 00 00 00 0118............
00 00 00 00 00 00 00 00
SCSI_Inquiry : end 0
##### START PrintInquiry
qualifier 0
type 8
data_format 2
ansi_version 2
ecma_version 0
iso_version 0
type_modifier 0
removable 1
vendor_info ADIC
prod_ident FastStor DLT
prod_version 0118
vendor_specific
using ident = generic, type = Generic driver tape/robot [generic]
##### START OpenDevice
OpenDevice : /dev/nst0
SCSI_OpenDevice : checking if /dev/nst0 is a sg device
No link /dev/nst0
using ident = generic, type = Generic driver tape/robot [generic]
need_eject set to 2
###### START get_drive_count
get_drive_count : fd 3
##### START GenericElementStatus
##### START SCSI_ModeSense
SCSI_ModeSense start length = 255:
##### START DecodeSCSI
SCSI_ExecuteCommand : MODE SENSE 1A 08 3F 00 FF 00
##### STOP DecodeSCSI
SCSI_ModeSense end: 0
##### START DecodeModeSense
65 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e...............
1D 12 00 56 00 01 00 01 00 07 00 00 00 00 00 52 ...V...........R
00 01 00 00 1E 02 00 00 1F 0E 0A 00 0A 0B 00 03 ................
00 00 00 00 00 00 00 00 00 2C 43 6F 70 79 72 69 ..........Copyri
67 68 74 20 28 43 29 20 31 39 39 37 20 2D 20 32 ght..C..1997...2
30 30 30 20 41 44 49 43 20 20 32 30 30 30 2D 30 000.ADIC..2000.0
35 2D 32 35 57 F6 00 00 00 05 08 00 00 00 00 00 5.25W...........
00 80 00 05 00 00 00 00 00 06 08 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 07 08 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 04 00 00 10 00 00 00 10 ................
00 52 09 00 00 00 20 03 00 80 00 01 00 00 00 00 .R..............
AC 00 55 F4 00 00 00 00 00 00 00 00 00 00 00 00 ..U.............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 3C 56 2C 19 .............V..
00 00 55 F4 30 BB 11 C0 60 00 36 C0 00 00 00 00 ..U.0.....6.....
00 00 00 00 00 00 00 00 00 00 00 00 27 57 7F
buffer length = 97
##### START BarCode
BarCode : fd 3
Ident = [FastStor DLT], function = [generic]
##### START GenericBarCode
08 80 02 02 33 00 00 00 41 44 49 43 20 20 20 20 ....3...ADIC....
46 61 73 74 53 74 6F 72 20 44 4C 54 20 20 20 20 FastStor.DLT....
30 31 31 38 00 00 00 00 00 00 00 00 00 00 00 00 0118............
00 00 00 00 00 00 00 00
##### STOP GenericBarCode => 0
##### START SCSI_ReadElementStatus
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 00 00 00 FF FF 00 00 00
08 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (1) SCSI_ExecuteCommand 0
SCSI_ReadElementStatus: DataBufferLength B0, ret 0
00 01 00 09 00 00 00 A8
##### START DecodeSCSI
SCSI_ExecuteCommand : READ ELEMENT STATUS B8 00 00 00 FF FF 00 00 00
B0 00 00
##### STOP DecodeSCSI
SCSI_ReadElementStatus : (2) SCSI_ExecuteCommand 0
00 01 00 09 00 00 00 A8 01 00 00 10 00 00 00 10 ................
00 56 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .V..............
02 00 00 10 00 00 00 70 00 01 08 00 00 00 00 00 .......p........
00 00 00 00 00 00 00 00 00 02 09 00 00 00 00 00 ................
00 80 00 02 00 00 00 00 00 03 09 00 00 00 00 00 ................
00 80 00 03 00 00 00 00 00 04 08 00 00 00 00 00 ................
00 80 00 04 00 00 00 00 00 05 08 00 00 00 00 00 ................
00 80 00 05 00 00 00 00 00 06 08 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 07 08 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 04 00 00 10 00 00 00 10 ................
00 52 09 00 00 00 20 03 00 80 00 01 00 00 00 00 .R..............
Media Transport Elements (robot arms) :
Element #0086 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 1 From = -001
TAG =
Storage Elements (Media slots) :
Element #0001 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0002 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0002
TAG =
Element #0003 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0003
TAG =
Element #0004 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0004
TAG =
Element #0005 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = 0005
TAG =
Element #0006 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Element #0007 E
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 2 From = -001
TAG =
Data Transfer Elements (tape drives) :
Element #0082 F
EXCEPT = 00
ASC = 00 ASCQ = 00
Type 4 From = 0001
TAG =
SCSI ADDRESS = 3
Import/Export Elements :
###### START drive_loaded
drive_loaded : fd 3 drivenum 0
##### START eject_tape
##### START GenericEject
GenericEject : use mtio ioctl for eject on /dev/nst0
##### STOP eject_tape [0]
###### START unload
unload : fd 3, slot 1, drive 0
unload : unload drive 0[82] slot 1[2]
unload : Slot 0 address 2 is full
###### START find_empty
start at 0, end at 7
###### END find_empty [0]
unload : try to unload to slot 0
##### START GenericMove
GenericMove : from = 82, to = 1
GenericMove : can't send SCSI commands to tape, no log pages read
##### START LookupElement
##### STOP LookupElement (DTE)
##### START LookupElement
##### STOP LookupElement (STE)
CheckMove : pDeviceCapabilitiesPage == NULLChgExit in CheckMove,
reason DeviceCapabilitiesPage == NULL
[root@apple amanda]#
-------------------
> Hi,
> On Thu, Mar 14, 2002 at 09:00:06AM -0500, Zhen Liu wrote:
> > Hi,
> >
> > Thank you very much for your suggestion.
> >
> > Meanwhile, I got another problem...when I enter the command
"amtape
> > daily show" I got the following message: scanning all 7 slots in
> > tape-changer rack: slot1: date X Label DailySet11 amtape: could
not
> > load slot DeviceCapabilitiesPage: == Null.
>
> Hmm, that is an indicator that the device for the robot is wrong.
> Can you send the debug output (/tmp/amanda)
>
> Thomas
>
> --
> -----------------------------------------------
> | Thomas Hepper [EMAIL PROTECTED] |
> | ( If the above address fail try ) |
> | ( [EMAIL PROTECTED]) |
> -----------------------------------------------
>
Zhen Liu
Via Webmail
[EMAIL PROTECTED]
