On Fri, Nov 07, 2003 at 01:27:28PM -0800, Stephen Walton wrote: > On Fri, 2003-11-07 at 09:33, Jon LaBadie wrote: > > On Fri, Nov 07, 2003 at 09:22:49AM -0800, Stephen Walton wrote: > > > > > > what exactly do I put > > > in amanda.conf to have amrecover automatically change to the correct > > > tape? > > > > Did you check the amanda man page? > > > > amrecover_changer "string" > > Thanks for the response, Jon. It turns out that both questions I asked > (why was amrecover failing and how to get it to work with the changer) > are related. I found by experiment that I have to "settape /dev/nst0" > in amrecover before it will work, and then also manually load the tape > amrecover says it needs. > > I do know of the amrecover_changer parameter, and it is set to > "/dev/nst0"in my amanda.conf, but amrecover still does not change > tapes. The relevant lines from my configuration are > > tpchanger "chg-scsi" > tapedev 0 > changerfile "/etc/opt/amanda/daily/chg-scsi-compaq.conf" > amrecover_changer "/dev/nst0" > > This does not work with amrecover but I'm unable to find a combination > which does.
As I noted, I've not used them. However I would not except your string "/dev/nst0" to be what it is looking for when the parameter name is "... changer". That is your tape drive isn't it? Perhaps the value it wants is the device of your changer, but I suspect that is in the *.conf file. So maybe it is the changer script name? Looks like yours is chg-scsi-compaq. jl -- Jon H. LaBadie [EMAIL PROTECTED] JG Computing 4455 Province Line Road (609) 252-0159 Princeton, NJ 08540-4322 (609) 683-7220 (fax)
