On Tue, 27 Jan 2004 at 10:12am, Allen Liu --- work wrote > I installed amanda on my server which is a sparc server. > I configured the server itself as a backup client. > When I run amdump there is no output from planner. I wonder how I can make it work. > I set up some pause point within planner.c, I can see the configure info was read > in. And also at > some point of planner, amandad daemon was started. But just there is no output comes > out from > planner. > > Here are my config: > > disklist: > > pete c0t0d0s0 comp-root > > /etc/inetd.conf: > amanda dgram udp wait amanda /myapp/am/libexec/amandad amandad > amandaidx stream tcp nowait amanda /myapp/am/libexec/amindexd amindexd > amidxtape stream tcp nowait amanda /myapp/am/libexec/amidxtaped amidxtaped
You need to ensure that this config passes 'amcheck' before you try amdump. Does it? If not, try to figure out the error message using FAQ-O-Matic or the list archives (both accessible via www.amanda.org). If you still can't get it, come back here with the *exact* error message and any relevant files from /tmp/amanda. -- Joshua Baker-LePain Department of Biomedical Engineering Duke University