I ran amcheck -c and got following error msg. the client 'pete' and server 'spike' are same machine.
---------------------------------------------------- spike:amanda:/myapp/am/sbin$./amcheck -c fst Amanda Backup Client Hosts Check -------------------------------- ERROR: pete: [can not read/write /etc/amandates: No such file or directory] Client check: 1 host checked in 1.184 seconds, 1 problem found (brought to you by Amanda 2.4.4p1) spike:amanda:/myapp/am/sbin$ ----------------------------------------------------- I can't find where the file 'amandates' is. Thanks Allen Liu IP Application Design and Engineering Bell Canada (613) 781-7368, [EMAIL PROTECTED] 1240 -160 Elgin St, Ottawa,ON, K2P 2C4 ----- Original Message ----- From: "Joshua Baker-LePain" <[EMAIL PROTECTED]> To: "Allen Liu --- work" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Tuesday, January 27, 2004 10:30 AM Subject: Re: how to initiate amanda amdump ? > On Tue, 27 Jan 2004 at 10:12am, Allen Liu --- work wrote > > > I installed amanda on my server which is a sparc server. > > I configured the server itself as a backup client. > > When I run amdump there is no output from planner. I wonder how I can make it work. > > I set up some pause point within planner.c, I can see the configure info was read in. And also at > > some point of planner, amandad daemon was started. But just there is no output comes out from > > planner. > > > > Here are my config: > > > > disklist: > > > > pete c0t0d0s0 comp-root > > > > /etc/inetd.conf: > > amanda dgram udp wait amanda /myapp/am/libexec/amandad amandad > > amandaidx stream tcp nowait amanda /myapp/am/libexec/amindexd amindexd > > amidxtape stream tcp nowait amanda /myapp/am/libexec/amidxtaped amidxtaped > > You need to ensure that this config passes 'amcheck' before you try > amdump. Does it? If not, try to figure out the error message using > FAQ-O-Matic or the list archives (both accessible via www.amanda.org). If > you still can't get it, come back here with the *exact* error message and > any relevant files from /tmp/amanda. > > -- > Joshua Baker-LePain > Department of Biomedical Engineering > Duke University
