--On Monday, October 18, 2004 13:26:24 -0400 [EMAIL PROTECTED] wrote: > Debian/stable (2.4.22 kernel) > Amanda-2.4.4p2 > tar (GNU tar) 1.13.25 > > Hi all, > > I'm trying to use amrecover to restore a users homedir, and keep > getting the following error when I answer 'Y' to the 'Load tape now' > question: > > EOF, check amidxtaped.<timestamp>.debug file on space-monster.permabit.com. > amrecover: short block 0 bytes > UNKNOWN file > amrecover: Can't read file header > extract_list - child returned non-zero status: 1 > > At first I thought maybe I had a bad tape, but I've tried on several > tapes, all with the same results. I just did an 'amtape <conf> update' > and that was able to correctly read the amanda labels off all of the > tapes. > > Any ideas?
Have you tried an 'mt rewind' before you press 'Y' ? Also be aware that sometimes even after you get your prompt back from the rewind command, the drive isn't ready yet for another command and will error on a read right afterwards. Try to rewind the tape and wait a few seconds after the activity light goes out before doing anything. If you can't see the light, then just try doing an 'mt status' and make sure that returns ok and shows BOT before you hit 'Y' in amrecover. Frank > > Thanks, > -- > Seeya, > Paul > > GPG Key fingerprint = 1660 FECC 5D21 D286 F853 E808 BB07 9239 53F1 28EE > > If you're not having fun, you're not doing it right! > -- Frank Smith [EMAIL PROTECTED] Sr. Systems Administrator Voice: 512-374-4673 Hoover's Online Fax: 512-374-4501
