I'm sure I just
have something written incorrectly, but here's the error I'm
getting
-bash-3.00$
amlabel dailyset dailyset0 slot 0
changer: got exit: 1 str: <error> could not read result from "/usr/local/libexec/chg-scsi-solaris.conf"
amlabel: could not load slot "0": could not read result from "/usr/local/libexec/chg-scsi-solaris.conf"
amlabel: could not load slot "0": could not read result from "/usr/local/libexec/chg-scsi-solaris.conf"
amlabel: pid 1812 finish time Wed Apr 26 16:27:24 2006
-bash-3.00$
changer: got exit: 1 str: <error> could not read result from "/usr/local/libexec/chg-scsi-solaris.conf"
amlabel: could not load slot "0": could not read result from "/usr/local/libexec/chg-scsi-solaris.conf"
amlabel: could not load slot "0": could not read result from "/usr/local/libexec/chg-scsi-solaris.conf"
amlabel: pid 1812 finish time Wed Apr 26 16:27:24 2006
-bash-3.00$
Output of that
file:
-bash-3.00$ cat
"/usr/local/libexec/chg-scsi-solaris.conf"
number_configs 1
eject 0 # Tapedrives need an eject command
sleep 15 # Seconds to wait until the tape gets ready
cleanmax 10 # How many times could a cleaning tape get used
changerdev /dev/0bn
#
# Next comes the data for drive 0
#
config 0
drivenum 0
dev /dev/rmt/0bn # the device that is used for the tapedrive 0 (BSD type, no rewind, no compression)
startuse 0 # The slots associated with the drive 0
enduse 17 #
statfile /usr/local/etc/amanda/dailyset/tape0-slot # The file where the actual slot is stored
cleancart 18 # the slot where the cleaningcartridge for drive 0 is located
cleanfile /usr/local/etc/amanda/dailyset/tape0-clean # The file where the cleanings are recorded
usagecount /usr/local/etc/amanda/dailyset/totaltime
tapestatus /usr/local/etc/amanda/dailyset/tape0-status
#labelfile /usr/local/etc/amanda/dailyset/labelfile # Use this if you have an barcode reader
-bash-3.00$
number_configs 1
eject 0 # Tapedrives need an eject command
sleep 15 # Seconds to wait until the tape gets ready
cleanmax 10 # How many times could a cleaning tape get used
changerdev /dev/0bn
#
# Next comes the data for drive 0
#
config 0
drivenum 0
dev /dev/rmt/0bn # the device that is used for the tapedrive 0 (BSD type, no rewind, no compression)
startuse 0 # The slots associated with the drive 0
enduse 17 #
statfile /usr/local/etc/amanda/dailyset/tape0-slot # The file where the actual slot is stored
cleancart 18 # the slot where the cleaningcartridge for drive 0 is located
cleanfile /usr/local/etc/amanda/dailyset/tape0-clean # The file where the cleanings are recorded
usagecount /usr/local/etc/amanda/dailyset/totaltime
tapestatus /usr/local/etc/amanda/dailyset/tape0-status
#labelfile /usr/local/etc/amanda/dailyset/labelfile # Use this if you have an barcode reader
-bash-3.00$
Amanada user has
read/write access to /usr/local/libexec and to the chg-scsi-solaris.conf
file.
can anyone point
me in the right direction?
Thanks