Am Mittwoch, den 01.11.2006, 08:12 +1300 schrieb Steve Wray: > Dominik Schips wrote: > > Hello, > > > > Am Dienstag, den 31.10.2006, 08:12 +1300 schrieb Steve Wray: > >> Hi there, > >> My amanda backup scripts do an amverifyrun after every run. > >> > >> One of our backup sets is on a tape changer. > > > > Sorry for the questinon, but I also have a tape changer. > > > > How do you do the amverifyrun after the backup if the backup used 2 > > tapes? > > It never uses 2 tapes.
My backup run is using two tapes. That is why I ask. > > Do you have a special script for this or is this possible with > > amverifyrun by default? > > How can I check my tapes after a backup? > > > > I was thinking I can do this with a script grapping for the last used > > tapes in the disklist file. > > But if someone else know a better solution, please let me know. > > amverifyrun is supposed to 'know' which tape was used last based on the > log files. > > Looking at the man page again though I have to say I am a little > dubious. It seems awfuly lacking in clarity or, well, any information at > all really. Thank you for this fast reply and information. I'll have a closer look about amverifyrun information in the next few days and do some more tests if possible. > > Thank you for every help. > > > >> Recently, amverifyrun appears to have been getting 'stuck', verifying > >> the same tape over and over again regardless of which tape was actually > >> used in the last backup run. > >> > >> Most recently its become stuck on a tape which has not yet been used in > >> amanda (labelled, never written to) resulting in some very amusing > >> output... > >> > >> Any suggestions on how to unstick it? > >> > >> Thanks! > > > > Best regards > > > > Dominik Schips > >