I have an Ultrium LTO-4, and cannot get it to work with Amanda. [EMAIL PROTECTED] ~]$ amlabel WeeklySet1 Weekly-01 Reading label... Can't open tape device /dev/nst0: Bad file descriptor amlabel: Could not open device tape:/dev/nst0.
Here is pertinent section of my /etc/amanda/WeeklySet1/amanda.conf: runtapes 1 # number of tapes to be used in a single run of amdump #tpchanger "chg-disk" # the tape-changer glue script #tapedev "file://data/amanda/vtapes/DailySet1/slots" #tpchanger "chg-manual" # the tape-changer glue script tapedev "tape:/dev/nst0" # the no-rewind tape device to be used #changerfile "/etc/amanda/DailySet1/changer" #changerfile "/etc/amanda/DailySet1/changer-status" #changerfile "/etc/amanda/WeeklySet1/changer.conf" #changerdev "/dev/null" #tapetype HARDDISK #tapetype HP-DAT # what kind of tape it is (see tapetypes below) tapetype LTO-4 define tapetype LTO-4 { comment "ULTRIUM LTO-4, compression off" length 770048 mbytes filemark 0 kbytes speed 73040 kps } *** Note that the tapetype was derived from doing the amtapetype command. Thanks in advance for your help.