* Jean-Louis Martineau <martin...@zmanda.com> [20100721 16:04]:
> Do the dump was done with the patched taper?
ah! I see what you mean now. I overlooked the fact that
the patch was modifying the taper, not just amstatus,
so I just recompiled but did not installed anything.
I just ran the new amstatus in the source dir, ie
amanda-3.1.1/server-src/amstatus.
I can't do anything right now as amanda is busy on the
servers running 3.1.1. I'll let you know later.
thanks,
jf
>
> Jean-Louis
>
> Jean-Francois Malouin wrote:
>> Hello Jean-Louis,
>>
>> I was away hence the delay.
>>
>> * Jean-Louis Martineau <martin...@zmanda.com> [20100719 08:31]:
>>
>>> Hi Jean-François,
>>>
>>> Try the attached patch, it will works with newer log files only.
>>> Thanks for reporting the bug.
>>>
>>
>> I applied the patch but it doesn't seem to do the right thing.
>> I get essentially the same output with the patched amstatus.
>> From a different amanda run than below:
>>
>> [...]
>>
>> SUMMARY part real estimated
>> size size
>> partition : 98
>> estimated : 50 1855244m
>> flush : 48 606853m
>> failed : 0 0m ( 0.00%)
>> wait for dumping: 0 0m ( 0.00%)
>> dumping to tape : 0 0m ( 0.00%)
>> dumping : 0 0m 0m ( 0.00%) ( 0.00%)
>> dumped : 50 1855210m 1855244m (100.00%) (100.00%)
>> wait for writing: 49 968740m 968774m (100.00%) ( 52.22%)
>> wait to flush : 0 0m 0m (100.00%) ( 0.00%)
>> writing to tape : 1 886469m 886469m (100.00%) ( 47.78%)
>> failed to tape : 0 0m 0m ( 0.00%) ( 0.00%)
>> taped : 48 606853m 606853m (100.00%) ( 24.65%)
>> 12 dumpers idle : no-dumpers
>> taper status: Writing bigbrain:BIG_BRAIN_pm3903_postmortem_mnc_original
>> taper qlen: 49
>>
>> plus other stats.
>>
>> Thanks,
>> jf
>>
>>
>>> Jean-Louis
>>>
>>> Jean-Francois Malouin wrote:
>>>
>>>> Hi,
>>>>
>>>> With amanda-3.1 seems we lost the tape usage in the summary report
>>>> output by amstatus. Prior versions were showning which tape has been
>>>> used along with its usage like (2.6.1p2):
>>>>
>>>>
>>>> SUMMARY part real estimated
>>>> size size
>>>> partition : 35
>>>> estimated : 21 871112m
>>>> flush : 14 341794m
>>>> failed : 0 0m ( 0.00%)
>>>> wait for dumping: 0 0m ( 0.00%)
>>>> dumping to tape : 0 0m ( 0.00%)
>>>> dumping : 0 0m 0m ( 0.00%) ( 0.00%)
>>>> dumped : 21 872030m 871112m (100.11%) (100.11%)
>>>> wait for writing: 20 472157m 471239m (100.19%) ( 54.20%)
>>>> wait to flush : 0 0m 0m (100.00%) ( 0.00%)
>>>> writing to tape : 1 399873m 399873m (100.00%) ( 45.90%)
>>>> failed to tape : 0 0m 0m ( 0.00%) ( 0.00%)
>>>> taped : 14 341794m 341794m (100.00%) ( 28.18%)
>>>> tape 1 : 14 520994m 520994m (134.96%)
>>>> av24-2_right2_V00023L3 (128 chunks)
>>>>
>>>> I liked that feature. Possible to get it back?
>>>>
>>>> Thanks!
>>>> jf
>>>>
>>
>>
>>> diff --git a/installcheck/amstatus.pl b/installcheck/amstatus.pl
>>> index cf41b47..6985c6c 100644
>>> --- a/installcheck/amstatus.pl
>>> +++ b/installcheck/amstatus.pl
>>> @@ -153,7 +153,7 @@ DUMP clienthost ffffffff9ffeffffffff1f /some/dir
>>> 20080618130147 14050 0 1970:1:1
>>> --------
>>> dumper: pid 4086 executable dumper0 version 9.8.7
>>> dumper: pid 4095 executable dumper3 version 9.8.7
>>> -taper: using label `Conf-001' date `20080618130147'
>>> +taper: wrote label 'Conf-001'
>>> driver: result time 1.312 from taper: TAPER-OK
>>> driver: state time 1.312 free kps: 600 space: 868352 taper: idle
>>> idle-dumpers: 4 qlen tapeq: 0 runq: 0 roomq: 0 wakeup: 0 driver-idle:
>>> not-idle
>>> driver: interface-state time 1.312 if default: free 600
>>> @@ -270,7 +270,7 @@ DUMP clienthost ffffffff9ffeffffffff1f "C:\\Some Dir\\"
>>> 20080618130147 14050 0 1
>>> --------
>>> dumper: pid 4086 executable dumper0 version 9.8.7
>>> dumper: pid 4095 executable dumper3 version 9.8.7
>>> -taper: using label `Conf-001' date `20080618130147'
>>> +taper: wrote label 'Conf-001'
>>> driver: result time 1.312 from taper: TAPER-OK
>>> driver: state time 1.312 free kps: 600 space: 868352 taper: idle
>>> idle-dumpers: 4 qlen tapeq: 0 runq: 0 roomq: 0 wakeup: 0 driver-idle:
>>> not-idle
>>> driver: interface-state time 1.312 if default: free 600
>>> @@ -414,7 +414,7 @@ DUMP localhost ffffffff9efeffffffffff01 /etc
>>> 20090410074759 14339 0 1970:1:1:0:0
>>> dumper: pid 4119 executable dumper3 version 3.0.0
>>> dumper: pid 4118 executable dumper2 version 3.0.0
>>> dumper: pid 4117 executable dumper1 version 3.0.0
>>> -taper: using label `maitreyee-010' date `20090410074759'
>>> +taper: wrote label 'maitreyee-010'
>>> driver: result time 2.928 from taper: TAPER-OK driver: state time
>>> 2.937 free kps: 8000 space: 1215488 taper: idle idle-dumpers: 4 qlen
>>> tapeq: 0 runq: 0 roomq: 0 wakeup: 0 driver-idle: not-idle
>>> driver: interface-state time 2.937 if default: free 8000
>>> diff --git a/server-src/amstatus.pl b/server-src/amstatus.pl
>>> index 79803c1..7d46425 100644
>>> --- a/server-src/amstatus.pl
>>> +++ b/server-src/amstatus.pl
>>> @@ -740,31 +740,10 @@ while($lineX = <AMDUMP>) {
>>> }
>>> }
>>> elsif($line[0] eq "taper") {
>>> - if($line[1] eq "slot") {
>>> - #2:slot 3:"wrote" 4:"label" 5:corrupted...
>>> + if($line[1] eq "wrote") {
>>> + #1:"wrote" 2:"label" 3:label
>>> $nb_tape++;
>>> - $lineX =~ /wrote label `(\S*)'/;
>>> - $label = $1;
>>> - $ntlabel{$nb_tape} = $label;
>>> - $ntpartition{$nb_tape} = 0;
>>> - $ntsize{$nb_tape} = 0;
>>> - $ntesize{$nb_tape} = 0;
>>> - }
>>> - elsif($line[1] eq "wrote") {
>>> - #1:"wrote" 2:"label" 3:corrupted
>>> - $nb_tape++;
>>> - $lineX =~ /wrote label `(\S*)'/;
>>> - $label = $1;
>>> - $ntlabel{$nb_tape} = $label;
>>> - $ntpartition{$nb_tape} = 0;
>>> - $ntsize{$nb_tape} = 0;
>>> - $ntesize{$nb_tape} = 0;
>>> - }
>>> - elsif($line[1] eq "using") {
>>> - #1:"using" #2:"label" #3:`label' #4:date #5 `timestamp'
>>> - $nb_tape++;
>>> - $lineX =~ /using label `(\S*)'/;
>>> - $label = $1;
>>> + $label = $line[3];
>>> $ntlabel{$nb_tape} = $label;
>>> $ntpartition{$nb_tape} = 0;
>>> $ntsize{$nb_tape} = 0;
>>> diff --git a/server-src/taper.pl b/server-src/taper.pl
>>> index 0b2883e..8c42493 100644
>>> --- a/server-src/taper.pl
>>> +++ b/server-src/taper.pl
>>> @@ -344,7 +344,7 @@ sub notif_new_tape {
>>> ++$self->{'tape_num'}));
>>> # and the amdump log
>>> - print STDERR "taper: wrote label `$self->{label}'\n";
>>> + print STDERR "taper: wrote label '$self->{label}'\n";
>>> # and inform the driver
>>> $self->{'proto'}->send(main::Protocol::NEW_TAPE,
>>>
>>
>>
